Sony D810 DPF-D720 operating instructions Remote control except for DPF- D700, Stand, 11 GB

\\Miyoshi-win\data1 (k)\+++NouhinMiyoshi+++\DPF-D1020_IM\0723M_4259440111DPFD710_IM_GB\040C02.fm Master: Right.L0

010COV.book Page 11 Friday, July 23, 2010 4:10 PM

Let’s get the photo frame ready

Remote control (except for DPF- D700)

Pull out the protective sheet before use as shown in the figure.

Protective sheet

Using the remote control

Point the top end of the remote control towards the remote sensor on the photo frame.

Stand

Turn the stand clockwise until the stand stops turning and is firmly attached to the stand socket on the rear panel.

You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand.

PNotes

•If the remote control stops working:

Replace the battery (CR2025 lithium battery) with a new one.

•When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.

Replacing procedures:	Let’s
CD-ROM (Handbook) page 10
	get
P WARNING
Battery may explode if mistreated.
	the
Do not recharge, disassemble or
dispose of in fire.	photo frame
zTips
	ready
x When the photo frame is
placed in the portrait
orientation

•The display is automatically rotated on the portrait orientation.

•A video file is not rotated automatically even if you change the orientation of the photo frame (DPF-D1020/D820/D720 only).

xSony logo

When the photo frame is placed in the portrait orientation or when you turn off the power, the Sony logo doesn't light up.

Continued

11 GB

DPF-D1020/D1010/D820/D810/D720/D710/D700 4-259-440-11(1)