Ingersoll-Rand Manual Chain Hoist Operation and Maintenance: MCH5 Series Guide

Page 1

Form MHD56028

PARTS, OPERATION AND MAINTENANCE MANUAL

for

MANUAL CHAIN HOIST MODELS

MCH5-005

MCH5-010

MCH5-015

1/2 ton

1 ton

1-1/2 ton

MCH5-020

MCH5-030

MCH5-050

2 ton

3 ton

5 ton

Unless otherwise noted, tons in this manual are metric tons (2,200 lbs.)

READ THIS MANUAL BEFORE USING THESE PRODUCTS. This manual contains important safety, installation, operation and maintenance information. Make this manual available to all persons responsible for the operation, installation and maintenance of these products.

WARNING

Do not use this hoist for lifting, supporting, or transporting people or lifting or supporting loads over people.

Always operate, inspect and maintain this hoist in accordance with American National Standards Institute Safety Code (ASME B30.16) and any other applicable safety codes and regulations.

Refer all communications to the nearest Ingersoll-Rand Material Handling Office or Distributor.

Form MHD56028 Edition 7 October 1996 71049530

© 1996 Ingersoll-Rand Company

Image 1
Contents PARTS, Operation and Maintenance Manual Safety Summary Safety InformationSafe Operating Instructions MCH5 SpecificationsHoist Capacity Installation Inspection OperationInitial Operating Checks Hoist OperationPeriodic Inspection Frequent InspectionLoad Chain Reports Normal Heavy SevereGeneral LubricationGears 11 Load ChainMaintenance TroubleshootingInstalling New Load Chain Equipment Being RepairedAttaching End of Load Chain General DisassemblyCleaning, Inspection and Repair DisassemblyAssembly GearsLoad Test Hand Chain Adjustment or ReplacementHoist Assembly Parts Drawing Hoist Assembly Parts List Return Goods Policy Accessories Parts Ordering InformationVisible Loss or Damage WarrantyConcealed Loss or Damage Damage Claims