52VISIONEER MX 200 DIGITAL CAMERA USER’S GUIDE
Problem: The flash doesn’t work.
Possible Cause | Solution |
The flash is not turned on.
Ensure that the flash is set to the Automatic or Always On options. Refer to page 33.
The batteries are weak and the flash is unable to recharge.
Turn the camera off and wait a few seconds before turning it back on. If this doesn’t work, replace the batteries.
Problem: When turned on, the LED flashes green, red, orange, and green. Then the camera crashes.
Possible Cause | Solution |
The SmartMedia card is not inserted correctly.
Turn the camera off. Remove and reinstall the SmartMedia card, see page 9 for details.
Problem: The Digital Camera Utility will not run when the camera is set to PC mode.
Possible Cause | Solution |
The computer monitor’s display is set to less than 24 bit color depth.