Uniden 23 user manual Quick Start, Prerequisites, Connect AppCam to the Network, Set Up Camera

QUICK START

This section provides a basic overview on setting up your system. If you need more specific details, refer to Setup and Installation on page 12.

PREREQUISITES

••

••

••

••

Router security level must be a minimum of WPA/WPA2.

Your router security level must support DHCP protocol and the DHCP option must be turned on.

The AppCam and your mobile device must connect to the same WiFi router for setup.

Available WiFi-enabled mobile device such as Android or iPhone smartphone or tablet.

STEP 1 – CONNECT AppCam TO THE NETWORK

Power up your camera and connect it to the router. Attach the antenna to the AppCam 23.

STEP 2 – Set Up Camera

Download Uniden’s AppCam app (“Uniden AppCam”) and set up a new system on your mobile device. When the camera and mobile devices are connected and you can see video on the mobile device, set up WiFi network management. After the camera resets, unplug it from your router. Verify that you still have connection through your mobile device.

9