Yamaha YST-SW160/90 owner manual Using two units, Connecting to this unit’s OUTPUT/INPUT terminals

Using two units

Disconnect your main speakers from the amplifier if connected, and connect them to the speaker terminals of this unit.

Right speaker Left speaker

English

OUTPUT	INPUT2		AUTO	PHASE	BASS
		STANDBY
TO SPEAKERS

This unit
	LOW HIGH NOM REV MOVIE MUSIC
FROM AMPLIFIER	OFF
INPUT1

To AC outlet

Speaker terminals

OUTPUT	INPUT2		AUTO	PHASE	BASS
		STANDBY
TO SPEAKERS

	This unit
	LOW HIGH NOM REV MOVIE MUSIC
FROM AMPLIFIER	OFF
INPUT1

Amplifier

To AC outlet

Connecting to this unit’s OUTPUT/INPUT terminals

For connections, keep the speaker wires as short as possible. (Cut the excessive wire, if necessary.) If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, by observing + and – markings. If these wires are reversed, the sound will be unnatural and will lack bass.

Do not let the core of the speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit, your amplifier and/or speakers.

How to Connect:

Red: positive (+)

Black: negative (–)

1 Unscrew the knob.

2 Insert the core of the wire. [Remove approx. 5 mm (1/4”) insulation from the speaker wires.]

3 Tighten the knob to secure the wire firmly.

*Banana Plug connections are also possible (except for U.K. and Europe models). Simply insert the Banana Plug connec- tor into the corresponding terminal.

5