Sony SIR4260V Backlight, Use the White Balance function to adjust the screen color, Ssdr OFF

Operating Your Camera

White Balance (White Bal)

Use the White Balance function to adjust the screen color.

1.When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’ .

2.Select a desired mode using the Function Setup switch.

MAIN SETUP

1.LENSDC 2.EXPOSURE

3.WHITE BAL ATW

4.SSDROFF

※Select one of the following 5 modes, as appropriate for your purpose.

ATW	: Select this when the color temperature is between 1,700˚K and 11,000˚K.
OUTDOOR	: Select this when the color temperature is between 1,700˚K and 11,000˚K.
	(sodium light inclusion)
INDOOR	: Select this when the color temperature is between 4,500˚K and 8,500˚K.
MANUAL	: Select this to fine-tune White Balance manually. Set White Balance first by
	using the ATW or AWC mode. After that switch to MANUAL mode, fine-
	tune the White Balance and then press the Function Setup switch.

AWC →SET : To find the optimal luminance level for the current environment, point the

camera towards a sheet of white paper and press the Function Setup

switch. If the environment changes, readjust it.

Notes

•White Balance may not work properly under the following conditions. In this case select the AWC mode.

When the color temperature of the environment surrounding the subject is out of the control range (e.g. clear sky or sunset).

When the ambient illumination of the subject is dim.

If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable.

SSDR (Samsung Super Dynamic Range)

SSDR illuminates darker spots of an image while retaining the same light level for brighter spots to even out the overall brightness of images with high contrast between bright and dark spots.

MAIN	SETUP
1.LENS	DC
2.EXPOSURE
3.WHITE BAL	ATW
4.SSDR	OFF
5.BACKLIGHT	OFF

1.When the SETUP menu screen is displayed, select ‘SSDR’ by using the switch so that the arrow indicates ‘SSDR’.

2.Use the switch to change the SSDR level according to the contrast between bright and dark areas.

SSDR ON SSDR OFF

BACKLIGHT

Unlike conventional cameras, the SIR-4260V is designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by using the features of the proprietary W-V DSP chip.

1.When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch so that the arrow indicates ‘BACKLIGHT’.

COLOR DOME CAMERA 20 User Guide COLOR DOME CAMERA 21 User Guide