Specifications CV-M300C, Connection Description

Specifications for CV-M300

Specifications	CV-M300C		CV-M300E

Scanning system	625 lines		525 lines
	25 frames/sec.		30 frames/sec.
CCD sensor	Monochrome 2/3" IT CCD
Sensing area	8.8 mm (h) x 6.6 mm (v)
Effective pixels	752 (h) x 582 (v)		768 (h) x 494 (v)
Pixels in video output	737 (h) x 575 (v)		758 (h) x 486 (v)
Cell size	11.6 (h) x 11.2 (v) ∝	m	11.6 (h) x 13.5(v) ∝ m
Resolution (horizontal)	560 TV lines		570 TV lines
Sensitivity on sensor	0.05 Lux, Max gain, 50% video
S/N ratio	>59 dB (AGC off, Gamma 1)
Video output	Composite VS signal 1.0 Vpp, 75 Ohm
Gamma	0.45 – 1.0
Gain	Manual – Automatic
	Potentiometer – AGC
Gain range	0 to +18 dB
Scanning	2:1 interlace – non-interlace
Accumulation	Field – frame
Synchronization	Int. X-tal. or Ext. HD/VD or random trigger
HD sync. input/output	4 Vpp, 75 Ohm*
VD sync. input/output	4 Vpp, 75 Ohm*
Trigger input	4 Vpp, 75 Ohm*
WEN output (write enable)	4 Vpp, 75 Ohm*
EEN output (exposure enable)	4 Vpp , 75 Ohm*
Pixel clock out (optional)	4 Vpp, 75 Ohm
Trigger modes	Normal, Edge pre-select,
	Pulse width control and Start/stop
Trigger input duration	>H to <1000H. (CCIR: 64 ∝ sec. to 1 msec.,
	EIA: 63.5 ∝	sec. to 1 msec.)
Internal and edge pre-select	1/50, 1/100, 1/250, 1/500, 1/1000,
	1/2000, 1/4500, 1/10,000 sec.
Pulse width control	1H to 251H
Start/stop	1/77 to 1/10,000 sec.
Long time exposure	1 field to ∞
	Duration between ext. VD pulses
Operating temperature	-5°C to + 45°C
Humidity	20 – 80% non-condensing
Power	12V DC ±10%. 3.6 W
Lens mount	C-mount
Dimensions	40 x 50 x 80 mm (HxWxD)
Weight	230 g

*HD sync., VD sync./(Trigger) input or output by internal jumpers. Factory setting: HD/VD input. Inputs TTL or 75 Ohm terminated by internal jumpers. Factory setting: 75 Ohm terminated.

Connection Description

DC-IN/SYNC.

Hirose HR 10A-10R-12P. Male.

Pin 1 Ground

2+12V DC

3Ground

4Video output

5Ground

6HD in/(HD output)

7VD input/ (VD/WEN output)

8Ground

9Pixel clock output (sine) optional**

10Ground

11+12V DC

12Ground

TRIGGER

Hirose HR 10A-7R-6P. Male.

Pin 1 N.C.

2EEN output

3Ground

4N.C.

5Trig. input

6 WEN pulse output

**Pixel clock output by internal jumper setting.

Dimensions

Front view

	50
	(1.97)
40	(1.57)

C-mount

Side view

80	12.7
26

Bottom view

13	34	4-M3
13	34
ø6
30
14		U1/4-20
30

Top view

5	50	4-M3
26

of their respective owners. to make changes to products and documentation without prior notification.

right

Switch Setting

Spectral Sensitivity

registeredtrademarks

reserves the

SHUTTER

TRIGGER ACCUMM INTERLACE GAMMA GAIN

OFF ON

1/60

1/100

1/250

1/500

1/1000

1/2000

1/4500

1/10,000

Seconds

<< < < > > > >

<< > > < < > >

<> < > < > < > Normal < > External

Field < > Frame

Interlace < > Non-interlace

1.0< > 0.45 Manual < > Auto

Rear view

mentioned in this datasheet are trademarks or responsible for any technical or typographical errors and

Ordering Information

CV-M300C 2/3” Industrial Monochrome Camera. CCIR CV-M300E 2/3” Industrial Monochrome Camera. EIA

product names	be held
and	cannot
Company	S
	.
	JAI A

JAI A.S, Denmark	JAI UK Ltd., England
Phone +45 4457 8888	Phone +44 1442 879 669
Fax +45 4491 8880	Fax +44 1442 879 281
www.jai.com	www.jai.com

JAI Corporation, Japan	JAI Vision OY, Finland
Phone +81 45 933 5400	Phone +358 9 8256220
Fax +81 45 931 6142	Fax +358 9 870 3345
www.jai-corp.co.jp

Visit our web site on www.jai.com

JAI America Inc., USA

Phone (Toll-Free) +1 877 472-5909 Phone +1 949 472-5900

Fax +1 949 472-5908 www.jai.com

31010442.05.01.2000