Preparation
Preparation
Inserting and Removing a Card
You can use an SD Memory Card (commer- cially available) or a MultiMediaCard (only supplied with
Inserting a Card
1 Make sure that the Power switch is set to OFF.
2Slide the card slot cover release and open the card slot cover in the direction of the arrow.
Card slot cover release
Removing a Card
Perform steps 1 and 2 above, push the card
(1) and pull the card straight out (2) as shown below.
Notes:
•You can use only the SD Memory Card or the MultiMediaCard (see page 86).
•The MultiMediaCard supplied with
•See pages 88 and 89 for more information on the cards intended for use with this camcorder.
Caution:
•Do not remove the card from the camcorder while recording data on the card (S indicator flashes during recording). This may delete the recorded image or damage the card.
3Insert a card into the slot as shown below, and push it in as far as it will go.
Label
Clipped corner
4Close the card slot cover.
13