Sharp VL-AH150U Specifications, Service Information For the U.S, AC Adapter UADP-0312TAZZ

Page 72

References

References

Specifications

VIEWCAM

Signal System: NTSC standard

Recording System: 2 rotary heads, helical scanning system Cassette: 8 mm video tape, MP type or Hi8 MP, ME type

Recording/Playback Time: 120 minutes (P6-120) Tape Speed: 14.345 mm/second

Pickup Device: 1⁄4 (6.4 mm, effective size: 4.5 mm) CCD image sensor (with approx. 270,000 pixels including optical black)

Lens: 16 power zoom lens (F1.4, f4.0–64.0 mm), and full-range auto focus

Lens Filter Diameter: 46 mm

Monitor: 3 (7.5 cm) [VL-AH150U]/3.5(8.8 cm) [VL-AH160U] full-color LCD screen (TFT active matrix)

Microphone: Electret monaural microphone

Color Temperature Compensation: Auto white balance with white balance lock

Minimum Illumination: 0.8 lux (5 lux measured by EIA standard) (with gain-up, F1.4) Video Output Level: 1.0 Vp-p 75-ohm unbalanced

Audio Output Level: 8 dBs, impedance less than 2.2 kohms Speaker Output: 200 mW

Power Requirement: DC 3.6 V (with battery pack) DC 7.0 V (with AC adapter)

Power Consumption: 5.1 W [VL-AH150U]/5.2 W [VL-AH160U] (during camera recording in full auto mode with zoom motor off and backlight in normal mode)

Operating Temperature: 0C to 40C (32F to 104F) Operating Humidity: 30% to 80%

Storage Temperature: 20C to 60C (4F to 140F)

Dimensions (approx.): 7 7⁄32 (W) 4 9⁄32 (H) 3 7⁄8 (D)

[183 mm (W) 109 mm (H) 99 mm (D)]

Weight (approx.): 1.57 lbs (710 g) [VL-AH150U]/1.58 lbs (715 g) [VL-AH160U] (without battery pack, lithium battery, video cassette, and lens cap)

AC Adapter (UADP-0312TAZZ)

Power Requirement: AC 110–240 V, 50/60 Hz DC Output: 7.0 V

Power Consumption: 15 W

Dimensions (approx.): 2 11⁄16 (W) 1 15⁄32 (H) 5 13⁄32 (D) [68 mm (W) 37 mm (H) 137 mm (D)] Weight (approx.): 0.68 lbs (308 g)

Battery Pack (BT-H22)

DC Output: 3.6 V

Dimensions (approx.): 2 1⁄8 (W) 3⁄4 (H) 2 7⁄32 (D) [54 mm (W) 19 mm (H) 56 mm (D)] Weight (approx.): 0.30 lbs (136 g)

Specifications are subject to change without notice.

SERVICE INFORMATION (For the U.S.)

For the location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies or customer assistance, please call 1-800-BE SHARP (1-800-237-4277) or visit SHARP’s website (http://www.sharp-usa.com).

63

Image 72

Contents See page 60 for use of Demo mode Model number and serial number whichImages of the Viewcam in this VL-AH150UThank you for purchasing this Viewcam from Sharp Applies to the supplied AC adapterInformation Iii Should never be blocked by placingPage Do not aim the lens at the sun Avoid shocks and droppingRecording Format LCD Monitor ScreenVii Viii Tripod adapter For 180 recordingContents Useful Features Advanced FeaturesReferences Gamma Brightness CompensationWhen the cassette compartment door is open Part NamesOperation Summary Cassette compartment door pRear view Remote sensor pQuick Reference Index Video cassette is defective and should be Battery Pack Inserting the Battery PackRemoving the Battery Pack Inserting and RemovingCharging the Battery Pack Battery packCharging time Max. continuousPowering the Viewcam from an AC Outlet Inserting and Removing a Cassette Inserting a CassetteRemoving a Cassette Perform above, then take out the cassetteInstalling the Lithium Memory Battery Removing the Lithium BatterySetting the Language Selecting the Language for the On-screen DisplayChanging the Language Camera Mode VCR ModeFrench On-screen Displays Spanish On-screen Displays Setting the Date and Time Changing to the 24-hour Time ModePress the SET button B 0 0Using the Hand Strap and the Lens Cap Attaching the Shoulder StrapAttaching and Removing the Lens Cap LCD screen sideEasy Camera Recording with Full Auto Mode To Turn the Power OffTo Pause Recording Maximum Continuous Recording and Actual Recording TimesZooming Tips on Recording PositionsBasic Operations Camera Recording Remaining Battery Power Display Approx. remaining On-screen Recording time IndicatorRemaining Recording Time Display Volume Control PlaybackTo Stop Playback Auto Tape RewindWatching the Playback on a This Viewcam does not have an S-video socketPlayback Video Search StillSlow Basic Operations PlaybackOperations of the On-screen Controls Menu buttonDisplay button Operation buttonsDesired setting Press the SET button B to selectPress Button C or D to Select the desired menu item Perform steps 4 to 6 aboveRecording the Date and Time Press the or Button to selectPress the SET button B to select AUTO, ON, or OFF Press the button to select SelectSetting the Digital Zoom To return to optical zoomUsing Digital Quick Zoom Setting the Digital Quick Zoom RangesTo cancel Digital Quick Zoom Digital Quick Zoom Extend ZoomSelecting Still Recording Mode Using Still RecordingStill Recording Type of Still Recording ModesTo cancel Strobe Recording mode To return to normal recording modeStrobe Recording Digital Image Stabilization DISSelecting Fade Mode Using Fade ModePress the SET button B to select the desired fade mode Fade In and Fade OutTo cancel Fade mode Quick ReviewTo use fade out only Quick Return Edit Search QU I CKTo cancel Gamma Brightness Compensation Gamma Brightness CompensationTo obtain a brighter picture Press the Gama EFF. button a againTo cancel the gain-up function Gain-up Cat’s EyeWide Screen Macro ShotsRemoving the Lens Hood To return to normal pictureSelf Recording Normal Self RecordingMore Information on Self Recording To pause recording, press the REC Stop button BSelf-recording Message Setting the Viewcam to Full Auto Mode BlueFeatures Program SearchUseful Tape Counter Feature Using the CounterTo reset the counter to zero To turn off the tape counterUsing the Counter Memory During playback, press the Menu Button until appearsPress the Play button D to view the desired scene Using the Remote Control Installing the Batteries in the Remote ControlTurning On the Remote Control Mode Operating the Remote ControlTo cancel the digital picture effect Advanced FeaturesDigital Picture Effects Type of Digital Picture EffectsType of Scene Settings To cancel the scene settingScene Menu Program AE Select Scene Menu in aboveSuperimposing a Title Changing the Preset Titles Press the Reset button to display the title input screenPress the or ß button Q to select Top of the screen and the cursor willTo cancel Manual Focus mode Auto/Manual FocusAuto Focus Manual FocusTo cancel White Balance Lock White Balance LockPress the White BAL. button. White BAL. returns to blue To cancel Manual Exposure mode Manual ExposurePerform steps 1 and 2 above, then press the Auto button B Digital Dual Picture Selecting Digital Dual PicturePicture-in-Picture Title Screen Picture/Backlight Adjustments Press the Menu button until Camera mode or VCR mode appearsType of Backlight Modes To cancel Gamma Playback Gamma PlaybackTurning Off the LCD Monitor Backlight Press the Gama EFF. button again. Gamma disappearsSetting Edit Mode EditingCutting Unwanted Sequences To stop editingUseful Information Hints for Better ShootingLighting Tips on Good LightingDew Formation Dirty Video HeadsBattery Pack Replacing the Fluorescent LampCleaning Using Your Viewcam AbroadReferences Video Cassette Tapes AC Adapter Demonstration Mode Canceling Demo Mode Watching the Demonstration Before Requesting Service Symptom Possible cause Suggested solutionVCR Specifications Service Information For the U.SBattery Pack BT-H22 AC Adapter UADP-0312TAZZInserció n y extracció n de la BateríaInserció n de la batería Extracció n de la bateríaCarga de la batería Selecció n de idioma para la visualizació n en pantallaGuía de operació n rá pida en españ ol Inserció n y extracció n de un videocasete Inserció n de un videocaseteExtracció n de un videocasete Realice el paso 1 de arriba y luego saque el videocasetePara hacer una pausa en la grabació n Para desconectar la alimentació nPulse el botón REC START/STOP para iniciar la grabación Control de volumen Reproducció nPara detener la reproducció n Rebobinado automá tico de la cintaPage Page Valid for warranty service in the U.S. only Where to Obtain Service What to do to Obtain ServiceSharp Plaza, Mahwah, New Jersey Osaka, Japan