Sharp SCL901 manual Preparing, Adjusting the Hand Strap and Shoulder Strap

00732M SCL901 SEA (1-19) 12/26/03 10:40 AM Page 16

ENGLISH

Preparing

1.Set power switch to CAMERA mode.

2.Press Self Timer button until the appropriate indicator is displayed on the LCD:

■WAIT-10S/SELF-30S

■WAIT-10S/SELF-END

1

CAMERA

3.Press START/STOP button to start the timer. :After waiting for 10 seconds, recording starts.

:If you have selected SELF-30S, recording stops automatically after 30 seconds.

:If you have selected SELF-END, press START/STOP again when you wish to stop recording.

Note: When recording with the timer, you can press START/STOP button again to cancel the function.

2

3

WAIT-10S SELF-30S

Adjusting the Hand Strap and Shoulder Strap

Hand Strap

✤It is very important to adjust the hand strap for better recording.

✤The hand strap enables you to:

-Hold the camcorder in a stable, comfortable position.

-Press the Zoom and the red Record button without having to change the position of your hand.

1. Pull open the Hand Strap cover and release the Hand Strap, adjust its length and stick it back onto the Hand Strap cover.

2. Close the Hand Strap cover back up again.

Shoulder Strap

✤ The Shoulder Strap allows you to carry your camcorder with complete safety.

1. Insert each end of the strap into the hooks on the camcorder.

2. Put the end of each strap through the buckle, adjust the length of the strap, then pull it tight in the buckle.

16