Yamaha YST-RSW300 Connecting to the INPUT1/OUTPUT terminals of the subwoofer, How to connect

Page 14

CONNECTIONS

Connecting to the INPUT1/OUTPUT terminals of the subwoofer

For connection, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the connections are faulty, no sound will be heard from the subwoofer or the speakers, or both of them. Make sure that the + and – polarity markings of the speaker cables are observed and set correctly. If these cables are reversed, the sound will be unnatural and lack bass.

Caution

Do not let the bare speaker wires touch each other, because this could damage the subwoofer or the amplifier, or both of them.

■Before connecting

Remove the insulation coating at the extremity of each speaker cable by twisting the coating off.

Good No Good

10mm (3/8”)

■How to connect

1Press and hold the terminal’s tab, as shown in the figure below.

2Insert the bare wire.

3Release your finger from the tab to allow it to lock securely on the cable’s wire end.

4Test the firmness of the connection by pulling lightly on the cable at the terminal.

Red: positive (+)

Black: negative (–)

2

1

Note

Do not insert the insulation coating into the hole. The sound may not be produced.

10En

Page 13 Page 15
Image 14
Page 13 Page 15
Contents YST-RSW300 Important Safety Instructions FCC Information for US customers Important Notice do not Modify this UnitThank you for selecting this Yamaha subwoofer system Contents Features Supplied AccessoriesPlacement Use the non-skid padsControls and Their Functions Subwoofer rear panel7STANDBY/ON switch Connections Using one subwoofer Using two subwoofersUsing two subwoofers with speaker cables Connecting to speaker output terminals of the amplifierUsing one subwoofer with speaker cables Subwoofer Speaker output terminals Left speaker Connecting to the INPUT1/OUTPUT terminals of the subwoofer How to connectVoltage Selector switch For Asia and General models only Plug in the subwoofer to the AC outletAdjusting the Subwoofer Before USE 6 1,6Automatic POWER-SWITCHING Function Changing the Auto Standby settingFrequency Characteristics This subwoofer’s frequency characteristicsAdvanced Yamaha Active Servo Technology Troubleshooting No soundSpecifications 17 EnPage Page WK23240

YST-RSW300 specifications

The Yamaha YST-RSW300 is a formidable subwoofer that brings an immersive audio experience to both home theaters and music enthusiasts. Renowned for its robust design and innovative technologies, this subwoofer has carved a niche for itself within the competitive audio equipment market.

One of the standout features of the YST-RSW300 is its 10-inch cone driver, which delivers powerful and precise bass response. This driver is engineered to produce low frequencies that enrich any audio track, from the deep rumble of an action movie's soundtrack to the subtle nuances of a classical music piece. Yamaha has incorporated its advanced YST (Yamaha Active Servo Technology) into the design, which optimizes the performance of the speaker by continually monitoring and adjusting the output to the input signal, ensuring that the sound remains clear and consistent regardless of volume levels.

The enclosure design of the YST-RSW300 is another critical element of its performance. Constructed from high-quality materials, the cabinet is reinforced to minimize resonance and distortion, allowing the subwoofer to deliver clean and powerful bass without unwanted vibrations. The ported design enhances airflow and further improves efficiency, resulting in a punchy and dynamic sound signature.

In terms of connectivity, the YST-RSW300 offers several options, making it versatile for various setups. It is compatible with modern audio equipment, featuring both line-level and LFE inputs, which facilitate easy integration with AV receivers and other audio components. Additionally, the subwoofer includes adjustable crossover controls, enabling users to tailor the sound to their specific preferences and room acoustics.

The YST-RSW300 also comes equipped with a built-in amplifier that delivers 300 watts of peak power, ensuring that it can handle demanding audio tracks with ease. The amplifier works in harmony with the driver to produce impactful bass and enhance the overall listening experience.

Moreover, the sleek and stylish design of the YST-RSW300 allows it to blend seamlessly into any home décor, making it an attractive addition to your audio setup. With its impressive combination of advanced technologies, powerful performance, and aesthetic appeal, the Yamaha YST-RSW300 stands out as a premium choice for those seeking a high-quality subwoofer in today's market. Whether you are watching movies, playing games, or enjoying music, this subwoofer elevates the audio experience, creating an immersive atmosphere in your home.
Top Page Image Contents