Yamaha YST-SW011 owner manual Using the subwoofer, Pre-adjusting the subwoofer vol- ume

Page 8

Using the subwoofer

 

 

4

 

 

INPUT

 

Rear panel

 

 

 

3

1

INPUT VOLUME

VOLUME

 

 

 

POWER

2

 

ON

 

OFF

 

POWER

ON

OFF

1Power indicator

Lights up GREEN when the POWER switch (2) is turned ON; turns off when the POWER switch is turned OFF.

2POWER switch

Press this switch to the ON position to turn on the power to the subwoofer. When the power of the subwoofer is on, the power indicator (1) on the rear panel lights up green. Press this switch again to set it to the OFF position to turn off the power of the subwoofer.

3VOLUME control

Adjusts the volume level. Turn the control clockwise to increase the volume, and counter- clockwise to decrease the volume.

4INPUT terminal

Input terminal for line level signals from the amplifier.

Pre-adjusting the subwoofer vol- ume

Before you use the subwoofer, first adjust the vol- ume balance between the subwoofer and the front speakers by following the procedure below.

1.Set the VOLUME control to minimum (0).

2.Turn on the power to all other components.

3.Press the POWER switch to the ON position. The power indicator on the rear panel lights up green.

4.Play a source that contains low-frequency sounds. Adjust the amplifier’s volume control to the desired listening level.

5.Increase the volume gradually to adjust the vol- ume balance between the subwoofer and the front speakers. To enjoy natural bass sound, keep the subwoofer volume at a level where it is barely distinguishable from other speakers.

6.Adjust the volume of the entire sound system using the amplifier’s volume control.

Note: It is recommended to set

VOLUME

theVOLUME control about in the mid- dle position when using in a multi chan- nel home theater system.

4

Image 8
Contents YST-SW011 Important Safety Instructions FCC Information for US customers Precautions Read this before operating this unit Introduction FeaturesSupplied accessories Positioning the subwoofer Use the non-skid padsConnections Basic connection exampleUsing the subwoofer Pre-adjusting the subwoofer vol- umeAdvanced Yamaha Active Servo Technology Troubleshooting Problem Cause RemedyFrequency characteristics SpecificationsThis product mainly uses lead-free solder 2005

YST-SW011 specifications

The Yamaha YST-SW011 is a powerful subwoofer designed to enhance the audio experience for home theater and music enthusiasts alike. Featuring Yamaha’s innovative technology, the YST-SW011 delivers an impressive bass response that fills the room without distortion, making it an ideal choice for both movies and music.

One of the standout features of the YST-SW011 is its advanced Yamaha Active Servo Technology. This technology employs a unique design that optimizes how the subwoofer interacts with the amplifier, resulting in a more controlled and precise output. The subwoofer is equipped with a 10-inch cone woofer that is capable of producing deep, rich bass tones. Complementing this is an efficient 100-watt built-in amplifier that ensures the subwoofer can deliver powerful performances without compromising on sound quality.

The YST-SW011 offers a frequency response range of 28 Hz to 200 Hz, making it capable of reproducing low-end frequencies that add depth to music tracks and movie soundtracks. This broad frequency range ensures that users experience the full spectrum of audio, from rumbling explosions in action films to the subtle nuances in musical compositions.

In terms of versatility, the YST-SW011 features adjustable volume and low-pass crossover frequency controls. This allows users to customize the subwoofer's output to match their particular system and room acoustics. The subwoofer can seamlessly integrate with a variety of speaker systems, making it a suitable choice for both stereo setups and surround sound configurations.

The build quality of the YST-SW011 is also noteworthy. It sports a sleek and modern design, finished in a black wood veneer that allows it to blend seamlessly with most home decor. The compact form factor ensures that it doesn't take up too much space while still delivering impactful sound performance.

Connectivity is straightforward, with both RCA and high-level inputs available, making it easy to connect to a wide range of audio equipment. The presence of a phase switch further aids in optimizing the integration of the subwoofer with other speakers in the setup.

In summary, the Yamaha YST-SW011 is a feature-rich subwoofer that delivers excellent performance and versatility. With its innovative technologies, robust design, and customizable settings, it is an excellent choice for anyone looking to elevate their audio experience. Whether for casual listening or a full home theater setup, the YST-SW011 is capable of providing deep, impactful bass that enhances any audio experience.