Yamaha YST-SW005 owner manual For U.K. customers, For Canadian Customers

Page 5

Thank you for selecting this YAMAHA subwoofer system.

CAUTION: Read this before operating your unit.

To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose this unit to rain or water.

Never open the cabinet. If something drops into the set, contact your dealer.

To reduce the risk or fire or electric shock, do not expose this unit to rain or moisture.

Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipments. Never pull the wires themselves.

When not planning to use this unit for a long period (ie., vacation, etc.), disconnect the AC power plug from the wall outlet.

To prevent lightning damage, disconnect the AC power plug when there is an electrical storm.

Since this unit has a built-in power amplifier, heat will radiate from the rear panel. Place the unit apart from the walls, allowing enough space above, behind and on both sides of the unit to prevent fire or damage. Furthermore, do not position with the

rear panel facing down on the floor or other surfaces.

<For U.K., Europe and China models only>

Be sure to allow space of at least 20 cm above, behind and on both sides of the unit.

Do not cover the rear panel of this unit with a newspaper, a tablecloth, a curtain, etc. in order not to obstruct heat radiation. If the temperature inside the unit rises, it may cause fire, damage to the unit and/or personal injury.

Do not place small metallic objects on this unit. Otherwise, the object may fall, possibly causing an injury.

Do not place the following objects on this unit: Glass, china, etc.

If glass etc. falls by vibrations and breaks, it may cause personal injury.

A burning candle etc.

If the candle falls by vibrations, it may cause fire and personal injury.

A vessel with water in it

If the vessel falls by vibrations and water spills, it may cause damage to the unit, and/or you may get an electric shock.

Do not place this unit where foreign objects such as water drips might fall. It might cause a fire, damage to this unit, and/or personal injury.

Never put a hand or a foreign object into the YST port. When moving this unit, do not hold the port as it might cause personal injury and/or damage to this unit.

Never open the cabinet. It might cause an electric shock since this unit uses a high voltage. It might also cause personal injury and/or damage to this unit.

When using a humidifier, be sure to avoid condensation inside this unit by allowing enough spaces around this unit or avoiding excess humidification. Condensation might cause a fire, damage to this unit, and/or electric shock.

Super-bass frequencies reproduced by this unit may cause a turntable to generate a howling sound. In such a case, move this unit away from the turntable.

This unit may be damaged by using at high volume level when 20 Hz–50 Hz sine waves from a test disc, bass sounds from electronic instruments, etc. are continuously inputted to this unit, or when the stylus of a turntable touches the surface of a disc. Reduce the volume level to prevent this unit from being damaged.

If you hear distorted noise (i.e., unnatural, intermittent “rapping” or “hammering” sounds) coming from this unit, reduce the volume level. Extremely loud playing of a movie soundtrack’s low frequency, bass-heavy sounds or similarly loud popular music passages can damage this speaker system.

Vibration generated by super-bass frequencies may distort images on a TV. In such a case, move this unit away from the TV set

Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.

Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty.

Secure placement or installation is the owner’s responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers.

VOLTAGE SELECTOR

(China and General models only) The VOLTAGE SELECTOR on the

rear panel of this unit must be set

110V-120V

 

VOLTAGE

 

 

 

 

SELECTOR

220V-240V

 

 

for your local main voltage BEFORE

 

 

 

 

 

 

 

 

 

 

plugging into the AC main supply.

 

 

 

 

 

 

 

 

 

 

 

 

Voltages are 110-120/220-240 V AC, 50/60 Hz.

 

 

 

For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide slot and fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

Standby mode

If the POWER switch is set to the ON position and the AUTO STANDBY switch is set to the HIGH or LOW position, this unit turns into the standby mode when no signal is received by this unit for 7 to 8 minutes.

In this state, this unit is designed to consume a very small quantity of power.

This unit features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move this unit away from the TV set.

E-1

Image 5
Contents YST-SW005 Important Safety Instructions We Want You Listening For a Lifetime Unpacking For Canadian Customers For U.K. customersContents FeaturesUse the nonskid pads PlacementConnections  Using one subwoofer Using two subwoofers Connecting to speaker output terminals of the amplifier How to Connect Connecting to the INPUT1/OUTPUT terminals of the subwooferControls and Their Functions Automatic POWER-SWITCHING Function Adjusting the Subwoofer Before USE Response MainSpeaker’s Advanced Yamaha Active Servo Technology Troubleshooting Power Supply SpecificationsAmplifier Output China and General modelsV848090

YST-SW005 specifications

The Yamaha YST-SW005 is a compact yet powerful subwoofer designed to enhance your audio experience, particularly in home theater setups and music listening environments. With a sleek design and advanced features, the YST-SW005 delivers deep, impactful bass that adds richness to soundtracks and music alike.

One of the major features of the YST-SW005 is its 8-inch cone woofer, which is adept at producing crisp lows and well-defined bass tones. The woofer is built with a high-quality composition that ensures durability and exceptional performance. This subwoofer is capable of delivering a frequency response range of 20 Hz to 150 Hz, enabling it to reproduce the deepest bass notes that many standard speakers cannot handle.

The Yamaha YST technology employed in this subwoofer is innovative and sets it apart from competitors. YST stands for Yamaha Active Servo Technology, which actively monitors and controls the motion of the woofer cone. This technology enhances dynamic range and low-frequency reproduction, ensuring that the sound is both powerful and precise, resulting in a richer audio experience.

The YST-SW005 also features a built-in 50-watt RMS amplifier, which provides ample power to enhance performance without distortion. A variable low-pass crossover control allows users to adjust the frequency range, enabling seamless integration with other speakers in a multi-channel audio setup. This flexibility in settings makes it easy to tailor the sound to fit various room acoustics and personal preferences.

Additionally, the subwoofer is fitted with both line-level and speaker-level inputs, providing versatility in connectivity. This means it can easily connect to a wide range of audio systems, whether using an AV receiver or directly connecting to speakers, ensuring compatibility with most home theater setups.

The cabinet design of the YST-SW005 is acoustically optimized, reducing unwanted vibrations and interference to maximize sound clarity. Its stylish appearance, available in a classic black finish, allows it to fit seamlessly into any living space without being an eyesore.

In conclusion, the Yamaha YST-SW005 subwoofer is an excellent choice for those seeking to enhance their audio experience with deep and powerful bass. With its innovative YST technology, solid construction, and versatile connectivity options, it stands out as a reliable addition to any sound system, providing a satisfying listening experience for music lovers and movie enthusiasts alike.