7
Assembly Instructions Cont.
A6. Once in place, replace the motor covers to secure the motor.
A6. Once the motor is attached, lay bed flat and install head and foot boards. There are 2 height adjustments on the head and foot board. Select the desired positions and hook the frame onto the foot board. Slide lock towards leg of foot board to secure position as shown. Repeat for opposite side.
HEIGHT ADJUSTMENT
9.The Competitor bed deck has two height adjustments.
10.Adjustment one is located on the frame as indicated below. There is a high position and a low position.
11.Adjustment two is on the leg of the head and foot board. To adjust, loosen the thumb screw on the leg and pull on the spring loaded knob with one hand and slide the leg to the desired height with the other hand. Once the desired position is found, turn the thumb screw until tight. Adjust other legs to the same position.
Slide Lock