96
Configuring the DVR
In order to access the DVR remotely, the DVR Server must be setup to allow remote connections.
Time Out Value | Specifies a value (in seconds) to wait for a signal |
| from the Surveillix Remote Client. If a signal is not |
| received by that time, the connection is dropped. |
Center Port | Used to transfer the connection data. |
|
|
Image Port | Used to transfer the image data. |
|
|
Search Port | Used to transfer the search data. |
|
|
Configuring the Server for Remote Connection
1.Enter Setup on the DVR.
2.Click Network to open the Network menu.
3.Clear the Disable Remote Control check box. You should now be allowed to adjust port settings if necessary.
Note If you are using a Firewall, it may be necessary to adjust the port settings on both the DVR and the Firewall. Contact the Network Administrator for more information.
4.Click OK.
5.Make sure a user account is created (See Creating a New User in the Setup Section). Without a user account, the Administrator account must be used.
6.The DVR server is now ready to receive incoming connections.