Toshiba CS3950DIF manual IEEE1394 connector pin arrangement, Trig pin connector

Page 14

[IEEE1394 connector pin arrangement]

IEEE1394 connector				: HSB-ARD62-SN15A				(DDK Ltd.)
Recommended harness				: HSB-HC□-A07				(DDK Ltd.)
Pin arrangement				: Refer to the table below.

		Pin No.		Signal name		I/O			Remark

		1		POWER		I

		2		POWER (GND)		I

		3		TPB−		I/O
		4		TPB+		I/O

		5		TPA−		I/O
		6		TPA+		I/O

[TRIG pin connector]
Connector				: HR25-7TR-4PA (Hirose Electric Co., Ltd.)
Applicable connector				: HR25-7TP-4S (Hirose Electric Co., Ltd.)
				* Not attached to this product.
Pin arrangement				: Refer to the table below.

		Pin No.		Signal name	I/O				Remark

	1			TRIG		I

	2			TRIG GND		I

	3			NC	—				Used in open

	4			NC	—				Used in open

					▼

② ①

④ ③

* The figure above is the camera-side connector seen from the fitting (insert) side.

 5 	Documents No. D4134648A

Image 14

Contents CS3950DiF Specification Contents Improper handling SymbolSerious injury *1 in the event of improper handling This sign indicates Mandatory Action You are required toAvoid Page Page Documents No. D4134648A Handle carefully Documents No. D4134648A Components FeaturesOverview Options IEEE1394 cable Mounting bracketInterface specifications SpecificationsElectrical specifications Trigger signal specificationsOperating ambient specifications Mechanical specificationsFCC Total number of pixels 1077 788IEEE1394 connector pin arrangement Trig pin connectorFIX mode FunctionsSelectable the video of 1024 × 768 maximum Up to 1 windowTiming charts Electronic shutter mode, 33ms*≧Exposure timeElectronic shutter mode, 33ms*＜Exposure time Format7mode0 Electronic Shutter OFF （Ext. IN） Pulse width Vendor / Model Name Leaves Model nameDetails of Node unique ID leaf are described as follows Ascii representationPerformance Environment Outline drawing Documents No. D4134648A