Toshiba Digital Recording and Transmission System, EHV Hybrid H.264 DVR manual Schedule

Embedded DVR User Guide

Schedule

Set the recording schedule for each camera:

1.Press SETUP on the front panel or remote control. or

Click TOOL on the Mouse-over menu and select SETUP.

2.Select RECORD > RECORD CONFIGURATION > SCHEDULE.

3.Select a camera to create a recording schedule, or select ALL.

4.Select the check box of the desired RECORD MODE.

5.Click the hour block or the day of the week to set the entire day.

NO RECORDING	No recording.
No Color	Even if you set recording frames and select ON in RECORD > CONFIGURATION > FRAME, the
	DVR will not record anything if you set NO RECORDING in RECORD > SCHEDULE.
CONTINUOUS	CONTINUOUS recording.
Yellow
MOTION	MOTION-detection recording.
Green	In this mode, the DVR records only when motion is detected in the motion area, and stops recording
	when motion is not detected. Adjust motion area settings in RECORD > MOTION/EVENT
	CONFIGURATION > INPUT.
	If you set Motion to OFF in RECORD > MOTION/EVENT CONFGURATION and set CONT + MOT in
	SETUP > RECORD > SCHEDULE the DVR will NOT record when motion is detected.
SENSOR	SENSOR-activated recording
Orange	In sensor mode, the DVR will record when a sensor is triggered - during DURATION time as set in
	RECORD > MOTION/EVENT CONFGURATION > ACTION.

________________________________________________________________________________________________________

39