Samsung SCC-B1311(P) operating instructions Eng

Page 3

6. Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or containers filled with water on top of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.

7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.

8. If any unusual smells or smoke come from the unit, stop using the product.

In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock.

9. If this product fails to operate normally, contact the nearest service center.

Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.)

10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.

CAUTION

ENG

1. Do not drop objects on the product or apply strong shock to it.

Keep away from a location subject to excessive vibration or magnetic interference.

2. Do not install in a location subject to high temperature (over 122°F), low temperature (below 14°F), or high humidity. Doing so may cause fire or electric shock.

3. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or damage to the product.

5. Keep out of direct sunlight and heat radiation sources. It may cause fire.

6. Install it in a place with good ventilation.

7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.

3D-B1311-EU.indb 2

2008-04-30 오후

Image 3
Contents Digital Color Camera Safety precautions ENG Important safety instructions External cctv camera installation Camera grounding Installing a lightening conductorContents Overview What is Color Rolling?Resolution FeaturesMount Adaptor Holes InstallationPackage Parts & DescriptionConnect the auto iris lens connector Things to keep in mind during installation and UseLens with zooming feature Install the lensAdjust the back focus Lens without zooming featureAC24V/DC12V SCC-B1311, B1311P AC220V ~ 240V SCC-B1011P Power Port Power Indication LEDFor SCC-B1011P SW2BLC Function SWITCH-1SW3FL SW1ELCVideo Out Port Function SWITCH-2OFF AWC ALC/ELCFlflickerless OFF/ON On ATWLine Lock AC PAL Standard System3IT, S-HAD-CCD InternalCorrect Disposal of This Product Memo