Toshiba X100 user manual Getting Started, Inserting and Removing an SD Card Optional

Section 2

Getting Started

Loading the Battery

Before using the camcorder, users must load the Lithium- ion rechargeable battery come within the package.

1.Slide the safety latch to the unlocked position and open the battery cover.

2.Insert the battery according to the correct polarity marks

( + or -).

3. Close the battery cover firmly, and slide the safety latch to the locked position.

Note

Please remove the insulator on battery connection before use.

Inserting and Removing an SD Card (Optional)

The camcorder comes with an internal memory which allows you to store pictures and movies. You can expand the memory capacity by using an optional SD/SDHC memory card.

1.Insert the memory card into the slot. Please refer to the figure on the right side.

2.To remove an installed SD card, press the card inwards to release it.

3.When the card pops out, gently remove it from its slot.

4.Recommended memory capacity: 1GB and above.

Note

•When a memory card is fitted, movies/pictures are saved on the card rather than on the built-in memory.

•Protecting Data on an SD Card: SD Card is read- only when it is locked. No pictures or movies can be recorded when the SD card is locked. Make sure the lock is on the writeable position before recording any media.

Writeable Write-Protected

positionPosition

10

EN