Samsung SCC-B5205(S)P, SCC-B5203(S)P manual Specifications, Details

➁When you put aside the cable of the camera instead of making a hole in the installation site, turn the lens to the end in a counter-clockwise direction and connect it to the cable guide as shown in the figure before placing it outside. (This is to prevent the inside cable from being short when the lens rotates, and you should remove some parts of the cable that may fall out of the case.)

5.Place the bracket ceiling so that the key image of the ceiling can be seen through the hole on the main body of the camera as shown in the figure, and turn it until you hear the locking sound.

6.Adjust the lens as desired, by rotating the lens up and down or right and left.

7.Assemble the Cover Dome into the camera so that the lens can be seen through the transparent part.

❈When you turn the Cover Dome, the lens installed inside also rotates. But you must separate the Cover Dome to adjust the lens up and down.

User Guide					User Guide
	5. Specifications
			Item	Details
		Display Standard		NTSC STANDARD
		CCD		1/3" SUPER HAD IT CCD
						E
		Effective Number of Pixels		768(H) x 494(V)
		Synchronization		Internal
		Resolution		520 TV Lines
		Signal Output		VBS 1.0Vp-p(75Ω, composite)
		S/N ratio		50dB
		Minimum Object Illumination		0.3 Iux
		Shutter Speed		Max. 1/100 Ksec
				B5201(S) : f=3.8mm, View=100°
		Lens		B5203(S) : f=3.0mm, View=126°
				B5205(S) : f=8.0mm, View=38.6°
		Body Color		B52XX : Black
				B52XXS : Silver
		In/out connector		Signal output: BNC, Power input : Terminal(2p)
		Operating temperature		-10~+50 °C
		Power source		DC 12V +10%,-5%
		Power consumption		2 W
		Size		85(ø) x 54(H)mm
		Weight		125g

8 9