Effective range of the remote control
When using the remote control, always aim it directly
at the remote control receive window of your 
video presenter. Refer to the figure at the 
right side for acceptable range.
Choose the video source with the
INT/EXT button of the presenter.
INT/EXT | LAMP | AWC |
AF | NEGA/POSI | FREEZE |
• Each time you press the button, the display shows EXT1 OUT, EXT2 OUT, AUX
EXT1 OUTOUT, VGA OUT, INT OUT.
•EXT1 OUT, EXT2 OUT
→Choose this mode to see the image of the AV device such as camcorder, video, laser disk player, DVD player.
•AUX OUT
→Choose this mode to see the image on the optional sub camera.
• VGA OUT (available for
→ Choose this mode to see the image on the computer connected to the VGA IN port.
• INT OUT
| → Choose this mode to see the image |
If NO EXT SYNC is displayed, | through the lens of the video presenter. |
check if the external input |
|
device is connected properly. |
|
Open the image on the AV device or computer. Now you see the image through the TV or monitor.
If necessary, you can adjust the audio volume using the volume buttons on the remote
control.
5m
30 | 30 |
|
5m 12m
15