Samsung ES74 Instructions on how to use the memory card, When the memory card is used incorrectly

Instructions on how to use the memory card

åBe sure to format the memory card (see p.54) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera.

åTurn off the camera power whenever the memory card is being inserted or removed.

åRepeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty.

åThe memory card is an electronic precision device.

Do not bend, drop or subject the memory card to any heavy impact.

åDo not store the memory card in an environment with strong electronic or magnetic fields, e.g. near loud speakers or TV receivers.

åPlease do not use or store in an environment where there are extremes in temperature.

åDo not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth.

åPlease keep the memory card in its case when not in use.

åDuring and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal.

åDo not use a memory card that is used in another digital camera. To use the memory card in this camera, format the memory card before using this camera.

åDo not use a memory card formatted by another digital camera or memory card reader.

åIf the memory card is subjected to any of the following, the recorded data may become corrupted :

-When the memory card is used incorrectly.

-If the power is switched off or the memory card is removed while recording, deleting (formatting) or reading.

åSamsung cannot be held responsible for lost data.

åIt is advisable to copy important data onto other media as backup e.g. hard disks, CD etc.

åIf there is insufficient memory available :

A [Memory Full] message will appear and the camera will not operate. To optimize the amount of memory in the camera, replace the memory card or delete unnecessary images stored on the memory card.

å Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data on the memory card.

016