Samsung SPD-3000, SPD-2300 user manual Initialization Setting, Status, Initialization Menu

Page 29

Functional Description

OUT1 OFF/OUT2 OFF : If you want to cancel the operating Alarm outputs at once, select the corresponding menu to cancel the operating Alarm.

MD Dwell Time : When the Motion Detection function is on, the motion of intruders can be detected. When the motion is detected, the Alarm signal is displayed in the Alarm Output Terminal. For detailed settings of the Motion Detection for each Preset menu, see page 43 and 44.

Alarm Setting

 

Alarm Setting

 

 

Alarm Enable

ON

Alarm Enable

ON

 

Alarm Input

 

Alarm Input

 

 

Alarm Output

 

Alarm Output

 

 

MD Dwell Time

OFF

MD Dwell Time

ON

30 SEC

ON/OFF : It can be set up how long the operation will be kept when the motion is detected. (1-59 sec, 1-59 min)

6) Initialization Setting

Initialization Menu

Main Menu

Initialize

Camera Setting

Power ON Reset

Sequence Setting

Factory Default Set

P/T Setting

Camera Default Set

OSD Setting

Auto Refresh OFF

Alarm Setting

Initial Position

Initialize

 

Status

 

Power On Reset : Camera is initialized into the original status of power input. Factory Default Settings : Camera is initialized into the factory default settings.

Data including Preset is deleted. This function is used for initialization all settings.

Camera Default Settings: If only the camera module is replaced due to camera module failure, the new camera module can be set up with the settings of the old camera module.

Auto Refresh : The electric circuit and the status of the equipment parts within the camera are optimized regularly. (The cycle can be set up.) If camera faces toward a certain source of light or if the settings cannot be kept because of the long time rotation filming of a certain area, the Auto Refresh function is used to maintain and re-set the existing camera settings. Default setting is OFF.

OFF, 1-7 Days : This function is disabled in the OFF mode. 1-7 Days enables the Auto Refresh operation in the interval of the selected days. Auto Refresh takes less than 10 seconds. The message “Auto Refresh” disappears after finishing the operation.

Initial Position : If you want to set the default direction of the camera so that the camera faces that direction when the power is turned on, you can set up the desired Pan and Tilt for the camera.

7) Status

The status of dome camera setting is displayed.

Main Menu

Camera Status

Camera Setting

CAM MODEL

= 30NC

Sequence Setting

CAM VERSION

= 03.06

P/T Setting

DOME VERSION

= 00.18

OSD Setting

CON PROTOCOL

= SAMSUNG TW

Alarm Setting

DOME ID

= 001

Initialize

CONTROLLER

= Duplex-9600

Status

 

 

Cam Model = 30NC

Camera Model

 

Cam Version = 03.06

Camera S/W Version

 

Dome Version = 00.01

Control Board S/W Version

Dome ID=001

Dome Camera ID

 

Controller=Duplex-9600

Communication Mode Setup

ENGLISH

SPEED DOME CAMERA 56 User’s Manual

SPEED DOME CAMERA 57 User’s Manual

Image 29
Contents 30X Crisp Image Detection Page 30X/23X Zoom Lens with Auto- Focus Function FeaturesContents Precautions RS-485/422 Terminal Setting Power ON/OFF Factory Setting OFFBody Camera HolderProtocol Baud RateBPS Camera Holder ConnectionPelco Samsung Elec Setting Camera ID Camera HolderSetting Camera ID Switch Camera Holder Factory Setting Camera ID = Setting RS-485/RS-422A Termination Camera Holder Setting Transmission Mode Camera HolderSetting Communication Method Camera Holder Setting for Factory Adjustment Camera HolderController Connection Terminal Camera Holder Alarm Connection Terminal Camera HolderSetting Termination Resistance Accessories InstallationProducts Sold Separately Preparation for Cable3000/2300 and installation structure Installation of SPD-3000/2300Cable Connection Ceiling boardFasten the ceiling mount on the ceiling Camera Installation outdoor HousingIndoor and Outdoor Housing STH-330PI, STH-330PO Body face each other Menu Organization Functional DescriptionOSD Menu Organization Symbol Description Main Menu Dome Camera User Menu SettingsCamera Setting White Balance WB ModeExposure Camera exposure can be controlledBack Light Select one mode among High, Middle, Low or OffSsnr Samsung Super Noise Reduction Sens-UpDay & Night Camera Setting OhterOthers Value is 225˚Sequence Setting Menu Sequence SettingSequence Setting Group SEQ Preset Edit 001Sequence Setting Swing SEQ Scene Adj 001Pan 360˚ Auto Run in Pan direction SettingTrace Area Name T SettingMain Menu Setting Camera Name Camera name is set up OSD SettingMain Menu OSD Setting Camera NamePreset Name Preset NamePreset/Swing/Group/Tour/Trace/A.Pan Alarm SettingMain Menu Alarm Setting Alarm Setting Alarm InputStatus of dome camera setting is displayed Initialization SettingStatus Initialization MenuProduct Structure Installation Product Structure and InstallationSpeed Dome Camera 60 User’s Manual SPD-3000 SPD-2300 SpecificationsDetección de imagen de Alta precisión Page Lente Zoom 30X/23X con Función Autoenfoque CaracterísticasPrecauciones de Seguridad Tabla de contenidosAccesorios Instalación Descripción funcional EspecificacionesPrecauciones de Seguridad Medio/Lleno CuerpoRS-232 RXD+ 2. RXD- 3. TXD+ 4. TXD- 5. GND 6. TX 7. RXNota Conexión del Soporte de la cámaraSamsung Pelco Samsung Elec Ajuste de ID de Cámara Soporte CámaraAjuste del Interruptor de ID de Cámara Soporte Cámara Las tres siguientes ID de Cámara no Ajuste RS-485/RS-422A Interrupción Soporte Cámara Ajuste de Modo de Transmisión Soporte CámaraAjuste de Método de ComunicaciónSoporte Cámara Ajuste para la composición de fábrica Soporte CámaraAjuste de Resistencia de Interrupción Terminal de Conexión de Alarma Soporte CámaraControlador de Conexión con la terminal Soporte Cámara Accesorios InstalaciónPreparación del cable Productos vendidos separadamenteDe la placa de cubierta Conexión del cable Instalación de SPD-3000/2300Tornillos y cable de sujeción Controlador de SPD-3000/2300 y el Controlador externoSujetar el montaje de la cubierta en el techo Instalación de la Cámara Cubierta ExteriorEn el techo Organización del menú Descripción funcionalOrganización del menú OSD Descripción de los símbolos Focus Ajustes de Menú de Usuario Cámara DomoEjecución del menú OSD Menú PrincipalLa exposure de la cámara puede ser controlada AWB ModeSeleccionar un modo entre High, Middle, Low o Off Ssnr Super Reducción de Sonido SamsungCámara Speed Dome 40 Manual de Uso Edit Menú Sequence SettingSeleccionados entre las funciones de la cámara Tecla ESC Salir para ir al siguiente paso de ProgramaciónFuncionamiento incorrecto de la cámara Preset SettingGroup SEQ Power On Resume Mode OFFApagado Auto Run Auto arranque será canceladoAuto Run Auto arranque Pan LimitArea Masking Camera Name Se establece el nombre de la cámara Prop. P/TDigital Flip Cámara Speed Dome 54 Manual de Uso Alarm Output Menú Initialize InitializeEsta función es utilizada para reiniciar todos los ajustes El estado de la cámara domo es visualizadoEstructura del Producto Estructura del producto e instalaciónInstalación Pixel Válido EspecificacionesDeclaration of Conformity
Related manuals
Manual 32 pages 43.37 Kb

SPD-3000, SPD-2300 specifications

The Samsung SPD-2300 is a versatile and innovative video surveillance solution designed to meet the demands of modern security systems. With its advanced features, robust technologies, and user-friendly characteristics, the SPD-2300 stands out in the crowded market of surveillance cameras.

One of the primary features of the SPD-2300 is its high-definition video resolution. The camera supports full HD 1080p video, ensuring that every detail is captured with clarity and precision. This level of resolution is crucial for identifying subjects, monitoring activities, and ensuring comprehensive coverage of monitored areas. The SPD-2300’s ability to deliver crisp images even in low-light conditions is enhanced by its advanced IR night vision technology, which allows for clear visibility in total darkness.

In terms of image processing, the SPD-2300 incorporates wide dynamic range (WDR) technology. This feature is particularly beneficial in environments with strong backlighting or varying lighting conditions, as it helps balance the exposure across the entire scene. This capability ensures that both dark and bright areas are effectively captured, providing a more accurate representation of the monitored environment.

The SPD-2300 is also equipped with motion detection capabilities. This technology actively monitors motion within its field of view and can trigger alerts or recording functions when movement is detected. This feature not only helps in conserving storage space but also enhances security by ensuring that only significant events are recorded.

Another significant characteristic of the SPD-2300 is its connectivity options. The camera supports both wired and wireless connectivity, providing flexibility in installation. This adaptability is essential for various applications, whether in residential, commercial, or industrial settings. Additionally, the SPD-2300 can be integrated with existing security systems, enhancing its functionality and user experience.

Moreover, the camera is designed with a user-friendly interface, making it accessible for users with varying levels of technical knowledge. Its mobile application allows users to monitor live feeds, receive notifications, and manage camera settings from their smartphones, contributing to a seamless surveillance experience.

Lastly, the durable construction of the SPD-2300 ensures reliability in various environmental conditions. Built to withstand harsh weather, this camera is ideal for both indoor and outdoor applications. With its combination of robust features, advanced technologies, and user-centric design, the Samsung SPD-2300 offers a comprehensive solution for anyone looking to enhance their security infrastructure.