Device Manager)
<‘1) USB Composite Device’ in ‘the Universal Serial Bus Controllers directory”, ‘2) USB Audio Device’ in the “Sound, video and game controllers directory’, ‘3)
If you checked that above three devices are installed properly, please run the AnyCam and enjoy the AnyCam world.
If the installation failed, follow the instructions below.
When you open the device manager in “My Computer”, you may find the error shown in the figure below.<FIG 13>
Right click on the error
Click “Update Driver” for the device driver and then select the driver path. The default selection is recommend.
Click the button for “Reinstall Driver” and the Hardware Update Wizard will start.
<FIG 13>
<FIG 14>
Click the radio button for “Install from a list or specific location (Advanced)”and click “Next”.
If you insert the installation CD, specify the “Search for removable media
Click the “Finish” button.
To verify if the installation of the device has been completed, check the following three devices in the Device manager, shown in the next figure. <Fig15>
6