Samsung SL40 manual How to Enable Functions Using the Menu Button, Exposure compensation, Factor

Functions ( )

How to Enable Functions Using the MENU Button

1.Press the MENU button in an available mode.

2.Press the Up / Down button to select the [Functions] menu and press the Right/OK button.

Use the Fn button on the rear of the camera to bring up the menus that enable frequently used functions faster.

Mode	EV			EV
	White Balance			White Balance
Functions	ISO			ISO
Sound	Face Detection	Right/OK		Face Detection
Display	Photo Size			Photo Size
		button
Settings	Quality			Quality
	Metering			Metering
Exit	Change		Exit	Back

3.Select a desired menu by pressing the Up / Down button and then press the OK button.

	EV			EV
	White Balance			White Balance
	ISO			ISO
	Face Detection	Up / Down		Face Detection
	Photo Size	button		Photo Size
	Quality			Quality
	Metering			Metering
Exit	Back		Exit	Back

4.Select a desired menu by pressing the Left / Right button and then press the OK button.

Exposure compensation

This camera automatically adjusts the exposure according to the ambient lighting conditions.

You can also select the exposure value by using the [EV] menu.

Compensating Exposure
1.	Click the Up/Down button from the			EV
	Functions menu to select [EV] (		).
				Set exposure value to adjust brightness.
2.	Use the LEFT and RIGHT buttons to
	set the desired exposure compensation
	factor.
3.	Press the OK button. The value you			Back	Move
	set will be saved and the Exposure Compensation setup mode
	will be closed. If you change the exposure value, the exposure
	indicator (	) will be displayed on the Left of the LCD monitor.

ÄA negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.

White Balance

Adjust the white balance according to the light source.

BackMove

Left / Right

button

Daylight

Appropriate for outdoor photography on a clear day.

BackMove

34