Samsung V3, 3500 manual Menu button, Press the Down button and the cursor will be shifted to

A / S / M

In this mode you can select the shutter speed or aperture value to your preference.

1. Rotate the mode dial to the A/ S/ M mode and press the	A/S/M	SETUP	MyCAM
MENU button.	SIZE
			2048x1536
2. Press the DOWN button and the cursor will be shifted to the
	QUALITY		FINE
main menu.	A/S/M		A
3. Select [A/S/M] menu by pressing the UP/DOWN button.	METERING		MULTI
4. Press the RIGHT button and the cursor will shift to the [A/S/M]
	EXIT:MENU		PAGE:
sub menu.
5. Select the desired sub menu by pressing the UP/DOWN button.
Aperture priority ( A ) :	A/S/M	SETUP	MyCAM
You can select the aperture value in this mode.	SIZE
The camera calculates the best shutter speed automatically
	QUALITY		A
to the proper exposure value.	A/S/M		S
Shutter priority ( S ) :	METERING		M
You can select the shutter speed in this mode.
	BACK:		SET:OK
The camera calculates the best aperture value automatically
to the proper exposure value.
Manual ( M ) :

You can select the shutter speed and the aperture value in this mode.

6.Press the OK button to confirm the setting.

Press the menu button twice and the menu display will disappear. Take a picture.

INFORMATION

After pressing the shutter button half way down, the values that were changed in the A/S/M mode will be applied to the picture.

If the aperture value or shutter speed is out of the limit of application, the value that is displayed on the LCD monitor will show as red. However, you will still be able to take a picture.

It warns that : To be the properly exposed, the aperture value should be smaller than F 2.8. The minimum aperture value that you can select is F 2.8.

RECORDING

51