Pelco manual C3605M-A 5/09

Page 7

5. Click OK. The new profile name appears in the “Choose profile” list.

Figure 4. Selecting a Behavior

6.Select Camera Sabotage from the Behaviors list (refer to Figure 4). The Global Settings area of the screen displays the required settings for this behavior.

Figure 5. Camera Sabotage Settings

7.Refer to Global Settings on page 8 to complete the setup for the new profile, and then click Apply to save the settings.

8.Click OK to close the Setup screen.

9.If necessary, restart any profile that was running before you set up this new profile.

C3605M-A (5/09)

7

Image 7
Contents Endura Camera Sabotage Behavior Page Contents Description Camera InstallationOverview Getting StartedProfiles ConfigurationSelecting a Camera to Modify ADD a ProfileC3605M-A 5/09 Rename a Profile Global SettingsDelete a Profile Save a Copy of a ProfileShow or Hide Analytics Reset AlarmOperation RUN a ProfileProduct Warranty and Return Information