Nikon user manual SB-600’s available flash modes, Available flash modes and usable cameras

Page 38

SB-600’s available flash modes

The SB-600’s available flash modes vary, depending on the cameras and lenses in use or the camera’s exposure mode. Using the TTL auto flash mode is recommended for normal flash photography.

●●● Available flash modes and usable cameras

Available flash mode

Usable cameras

 

 

 

 

i-TTL mode

Cameras compatible with CLS, COOLPIX cameras

 

 

compatible with i-TTL

TTL auto flash mode

D-TTL mode

Digital SLRs not compatible with CLS

TTL (film-based) mode

Cameras (film-based) in Groups I to VI (No o

 

 

 

appears with cameras in Groups III and IV while

 

 

performing Balanced Fill-Flash)

Manual mode

Manual flash

No limitation

uMonitor Preflashes

The SB-600 fires a series of imperceptible Monitor Preflashes just before the flash fires so that the camera can obtain necessary information on the subject. This applies to situations when the SB-600 is used with cameras compatible with CLS, digital SLRs not compatible with CLS, cameras in Group I with a CPU lens, and COOLPIX cameras compatible with i-TTL, and flash mode is set to TTL auto flash.

•Monitor Preflashes are fired instantaneously and cannot be differentiated from the main flash.

•When Monitor Preflashes are fired, H appears on the LCD panel (when using a single flash unit). For cameras in Group I, however, Monitor Preflashes are not fired when the

SB-600’s flash head is adjusted to other than the horizontal/front position or the camera’s flash sync mode is set to rear-curtain sync, even when H appears on the LCD panel.

32

Page 37 Page 39
Image 38
Page 37 Page 39
Contents SB-600 For your safety Preparation For your safety IiiPreparation For your safety Contents Contents Detailed operation PreparationBasic operation Other functionsMain features and functions of the SB-600 ForewordNikon Creative Lighting System Marks used in this manual Supplied accessoriesForeword Take trial shots Tips on using the SpeedlightUsing your Speedlight correctly Have Nikon spot-check your Speedlight regularlyCamera groups and available flash modes Group Camera nameManual mode Speedlight parts and their functions Control buttons p Mounting-foot lock lever p Control buttons Easy setting for the optimum TTL auto flash mode Flash mode p LCD panelCharacteristics of the LCD panel Using the SB-600 in dim lightType Nikkor lenses LensesCPU lenses CPU Nikkor lensesBasic operation Installing the batteries Usable batteriesReplacing/recharging the batteries Type of battery Recycling time RemedyMinimum number of flashes and recycling times Button Test firing Confirming the exposureTest firing Standby function to conserve battery power Setting the standby functionAttach the SB-600 to the camera and adjust Digital data communication with the SB-600 Flash headTurn the mounting-foot lock lever securely until it stops Setting the camera’s exposure mode Exposure mode and metering systemMetering system Aperture-Priority Auto exposure a modeManual exposure M mode Setting the SB-600’s flash mode Selecting the flash modeISO sensitivity Flash shooting distance range in the TTL auto flash modeAbout the flash shooting distance range Set the camera’s flash sync mode to front-curtain sync Compose the picture and shoot with flash Display of the amount of underexposure Using the SB-600 with the Coolpix Detailed operation Monitor Preflashes SB-600’s available flash modesAvailable flash modes and usable cameras Automatic Balanced Fill-Flash Do TTL auto flash modeTTL auto flash mode D Standard TTL flash DManual mode LCD panel in the Manual modeTo calculate the correct aperture Guide number ISO 100, m/ftISO sensitivity factors To obtain the correct flash output levelManual mode To calculate the shooting distanceSame flash Output level Setting the flash output levelWhen you press the j button When you press the i button Do not exceed the maximum number of continuous firings Flash mode Max. number of continuousSynchronization during continuous flash shooting Max. number of continuous firingsOther functions Setting the zoom-head position Power zoom functionUsing the built-in wide-flash adapter Setting the zoom-head position manuallyCanceling the power zoom function using Custom Settings For the main subject only Exposure compensation Available flash mode Usable cameraBackground For the background onlyMaking exposure compensation for the main subject only Manual flash modeCompensation Making exposure compensation for the background onlyCanceling flash output-level compensation For details, see your camera user’s manual Slow-sync flash Red-eye reduction with slow-sync flash modeSlow-sync flash mode, red-eye reduction control Red-eye reductionShooting data Rear-curtain syncRear-curtain sync Auto FP High-Speed Sync mode for compatible cameras 14*1Zoom-head position mm Level Guide number in Auto FP High-Speed Sync ISO 100, m/ftFactors Flash Value Lock FV Lock for compatible cameras Autofocus flash operation in dim light For cameras compatible with CLSFor cameras having a built-in Speedlight Using the SB-600 off-cameraAutofocus flash operation in dim light No item appears when the settings are not available Custom SettingsSetting Custom Settings Custom Settings Details on Custom Settings Bold default settingBold default setting Power zoom function p LCD panel illuminator pPage Advanced operations Multiple flash Usable cameras Usable Speedlights Operation Overview of multiple flash operationMaster flash unit and remote flash units Advanced operations Setting up the master and remote flash units Wireless multiple flash shootingFlash set-up in the Advanced Wireless Lighting To prevent the remote flash units from firing accidentally Using the Speedlight StandAttachment to the Speedlight Stand Flash shooting in Advanced Wireless Lighting Setting the SB-600 as a remote flash unitSettings on the remote flash units Setting a group and channel number on the remote flash unitsFlash shooting in Advanced Wireless Lighting Examples of flash shooting in Advanced Wireless LightingSet the group of the remote flash units a and B Modeling illuminator in the Advanced Wireless Lighting mode Ready-light Sound Master Remote flash unitSpeedlight condition Ready Auxiliary Beeping Multiple flash shooting using cords Maximum number of flash units to be connected using cords Speedlight CoefficientSystem chart for TTL multiple flash shooting using cords Remote flash unit Choosing the reflecting surface Bounce flash operationTilting the flash head Shooting dataAdvanced operations Flash head tilting and rotating angles Setting the flash headBounce flash operation Close-up flash operation Example of close-up shooting with two flash unitsClose-up flash operation Confirm that the ready-light is on, then shootISO sensitivity 100 200 400 800 1000 Coefficient m/ft 4.6 Setting the apertureWhen shooting subjects closer than 0.6 m 2 ft ISO Reference information Cameras compatible with the TTL/D-TTL auto flash mode Camera TTL mode Exposure Metering Lens CPU lens Non-CPU lens*1TTL auto flash modes available with the SB-600 Metering LensOptional accessories Accessories for multiple flashUsing colored gel filters with digital cameras Optional accessoriesOther accessories Balancing light from the flashStorage CleaningTips on Speedlight care Operating locationUsable batteries NiCd batteriesProblem Cause TroubleshootingProblems with the SB-600 Troubleshooting Ready-light warning inside the camera’s viewfinderSpecifications Bounce capability ON/OFF button SpecificationsBattery type Ready-lightH x D Weight SettingsFlash adapter Dimensions AccessoriesSymbol IndexRed-eye reduction with slow-sync
Related manuals
Manual 92 pages 51.98 Kb
Top Page Image Contents