Nikon SB-600 instruction manual LCD panel in the Manual mode

Manual mode

Manual mode

In Manual flash photography, you select the aperture and flash output level. This allows you to control the exposure and flash shooting distance when the correct exposure is difficult to obtain in the TTL auto flash mode. The flash output level can be set from M1/1 (full output) to M1/64 to suit your creative preferences.

You can calculate the correct aperture by using the guide number table and the shooting distance. Then, set the same aperture manually on the lens. In this case, set the camera’s exposure mode to Aperture-Priority Auto (A) or Manual (M).

•No limitation on usable cameras.

•Refer to your camera’s instruction manual for details on camera and lens aperture settings.

•The shutter might not be released if the camera's exposure mode is at a setting other than Aperture-Priority (A) or Manual (M) and the SB-600 is in Manual mode, depending on the camera in use. For details, refer to your camera's instruction manual.

•In the Manual mode, there is no warning ready-light to indicate that the light may have been insufficient to obtain a correct exposure.

●●● LCD panel in the Manual mode

Manual flash	Flash output level in Manual flash
		Represents the flash output level in fractions and
		decimal places.

LCD panel when a camera compatible with CLS is used.

34