Metz 34 AF-3 P Setting the mecablitz into operation, Preconditions, Features this function

Page 7

3. Setting the mecablitz into operation

3.1 Preconditions

The mecablitz must only be used with TTL flash controlled autofocus cameras!

The sensor of TTL flash controlled cameras measures the light reaching the film through the camera lens and instantly cuts out the ￿ flash when the film has been correctly expo- sed. Please refer to the camera’s operating instructions to find out whether your camera

features this function.

Afull-power flash is fired if the camera does not feature TTL flash control!

In other words: Without TTL flash control, the meca- blitz fires an unmeasured flash at maximum output.

The camera's integrated flash may be additio- nally used only if it can be completely folded out into its operating position.

An incompletely folded out camera flash unit can be damaged when the shutter release is tripped.

OFFON

Fig. 3: Switching the flashgun on and off

3.2 Switching the flashgun on and off

Set the main switch in the ON position to turn on the flashgun. The green flash-ready indicator lights up to indicate flash readiness.

Set the main switch in the OFF position to turn off the flashgun.

7

Image 7
Contents Mecablitz 34 AF-3 P Dear Customer ForewordContents Do not dispose of spent batteries with domestic rubbish Safety instructionsDo not short-circuit batteries! Danger of Explosion Disposal of batteriesPreparing the mecablitz for use Power supplyLoading and exchanging batteries Mounting/Removing the flashgun Automatic flashgun switch-offPreconditions Setting the mecablitz into operationFeatures this function Switching the flashgun on and offFlash-ready indication Flashgun instructions to the cameraAutomatic flash sync speed control Or blinks slowly Correct-exposure indication see figMeaning Not illuminatedTTL flash control AF red-light beam Autofocus measuring flashFlash in the individual camera modes Triggering lock only SF1 and SFxAutofocus measuring flash Fill-in flash Flash techniques and flash functionsExposure correction Mounting and removing the attachments Lighting and attachmentsGuiding edge Case gap Forming the flash capacitor Care and maintenance TroubleshootingTroubleshooting Switch off the flashgun with the main switchNumber of flashes Flash recycling time Technical dataColour temperature approx K Synchronization Flash durationSticker can be applied to the back of the flashgun Lighting distances