Installing the Flash Link optical cable adapter
The Flash Link adapter included with your camera connects the Flash Link optical cable to the DC800 camera housing. This adapter is only needed when using the SeaLife external flash accessory. Optical cables (item SL962)and external flash accessories (SL961, SL960D) are optional accessories sold separately. For more information about these accessories, please contact your local SeaLife dealer or visit
Step 1: Push the optical cable into one of the grooves so it’s locked firmly into position. The end of the cable must be directed at the camera’s flash but should not stick out beyond the adapter. The adapter has two grooves, so you can add another cable when using two flashes.
Step 2: Attach the Flash Link adapter around the lens and push down until it locks firmly into place. There are two small locking mechanisms located on the outer edge of the adapter that should lock in to the camera housing. Make sure the adapter is oriented so it
is aligned with the recessed flash window.
How To Open And Close Waterproof Housing >>
65