Metz 36 AF-3C, 36 AF-3M, 36 AF-3N operating instructions Power supply, Power Supply

Page 14

Power Supply

Alimentazione Alimentación de corriente

4. Power supply

4.1 Suitable batteries

The mecablitz can be operated with any of the following bat- teries:

4 NiCad batteries, type IEC KR 15/51. They permit very fast recycling and are economical in use because they are rechargeable.

4 nickel metal hydride batteries. They have a significantly higher capacity than NiCad batteries and are less harmful to the environment (no cadmium).

4 alkaline manganese dry-cell batteries, type IEC LR6. Maintenance-free power source for moderate power re- quirements.

Do not use lithium batteries! Their higher cell voltage may damage the electronic system of the flash unit.

Remove the batteries from the mecablitz if the flash unit is not going to be used for an extended period of time.

106

Image 14
Contents Mecablitz 36 AF-3 C/M/N 100 Power supply 106Indice Supported dedicated functions Contenido Mounting the mecablitz 102122 Contents Indice ContenidoSlow synchronisation / Slow 152 Maintenance and care 154 124156 160 Technical dataMetric system Foreword Premessa Introducción Safety instructions Page Page Supported dedicated functions Canon camera type Camera Canon Tipo de cámara CanonPage Nikon camera type Camera Nikon Tipo de cámara Nikon Mounting the mecablitz Mounting the mecablitz on the cameraRemoving the mecablitz from the camera Power supply Power SupplyReplacing batteries Switching the flash unit on and off Dedicated functions and flash mode 114 116 118 120 122 Red flash symbol illuminated Flash unit is ready for firing 126 Page 130 132 134 Only with mecablitz 36 AF-3 N 138 140 142 Programmed Auto Flash Mode Settings on the flash unitFlash techniques Reflector can be turned vertically up toGuide number Rear Second-curtain synchronisation Slow synchronisation / Slow Maintenance and care Forming the flash capacitorTechnical data 158 Technical Data Dati tecnici Características técnicas