Samsung Digimax A4 user manual An FCC warning

Page 7

Caution

Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera.

Do not short circuit, heat or dispose of batteries in fire. Do not insert the batteries with the reverse polarities.

Remove the batteries when not planning to use the camera for a long period of time. Batteries may leak corrosive electrolyte and permanently damage the camera's components.

Do not fire the flash while it is in contact with hands or objects.

Do not touch the flash after using it continuously. It may cause burns.

Do not move the camera while it is switched on, if you are using the AC Power Adapter. After use, always switch off the camera before unplugging the adapter from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock.

A non-rechargeable (disposable) battery can be used but has a short lifespan because of its relatively low battery capacity. We recommend the rechargeable battery which has a bigger capacity and longer lifespan than the non rechargeable type. (Rechargeable batteries may not be available everywhere).

An FCC warning

This device has been tested in accordance with the limits of a class B digital device under item 15 of the FCC rules. These limits are designed to provide protection against harmful interference in commercial installation. This equipment generates, absorbs and can emit radio frequency energy. If it is not installed and used in accordance with the instructions, it may cause harmful interference to radio communication.

There is however, no guarantee that interference will not occur in some situations. Should any interference occur when this device is in operation, please try one or more of the following measures.

Change the location and direction of any aerial.

Increase distance between the camera and the affected device.

Use a different socket away from the affected device.

Please contact a Samsung agent or a radio/TV engineer.

This device complies with part 15 of the FCC Rules.

Changes or modifications not expressly approved by the party responsible for compliance could void user's authority to operate the equipment.

7

Image 7

Contents English Instructions Contents Dpof Standard Dpof Index Dpof Print Size Dpof CancelFAQ DpofAbout the icons Getting to know your cameraPage An FCC warning SNB-2312 System chartCR-V3 battery Pouch Camera strapSee p.94 ComputerSystem Requirements USB Identification of featuresFront & Top Back & BottomLeft Mode switchSELF-TIMER Side / 5-function buttonScene Portrait Landscape Text ProgramAuto Program Movie Clip PlayNi-Cdover 1000mAh Connecting to a Power SourceArrow Polarity+Insert the batteries taking note of the polarity + Instructions on how to use the memory card Fine 2272 2048 1600 1024 640 320Removing the memory card Inserting the memory cardLCD monitor indicator Starting the recording mode LCD monitor indicatorStarting the recording mode Still Image mode Things to Watch Out for When Taking Pictures Zoom W/ T button Using the camera buttons to adjust the cameraZoom W/ T button Voice memo / UP button Macro Macro / Down button FocusingVoice memo / UP button Types of focus modes and focus rangesFocus lock Macro / Down button FocusingFlash range Unit m Flash / Left buttonISO Wide Tele Less intense the flash will be Flash mode indicator Icon DescriptionAutomatically Reduction function10SEC self-timer Self-timer / Right buttonDouble self-timer Menu button MENU/ OK button+/- button White paper Shown Saved and the Exposure Compensation setup mode willExposure compensation factor LCD button Fine Quality Normal 15FPS 24FPS Using the LCD monitor to adjust the camera settingsCamera working mode 640X480 320X240 160X120Metering Multi How to use the menuEffect Scene ModeSize Avi QualitySepia MeteringEffect SpotSoft SharpnessVivid Slot number to save Press the right buttonSlot number to load Starting play mode Image Starting play modeVoice file, the voice indicator Will be displayed on Will beFlash OFF SizeDate Thumbnail / Enlargement button Record a voice memo CancelCancels trimming TrimTemporarily stops playback Pause mode Resumes playbackPlay & Pause / Down button Voice memos can’t be recorded onto movie clip filesInitial display LEFT/ RIGHT/ MENU/ OK buttonLCD button Tab to the left of the cursorDelete button If Cancel is selected cancels Delete ImageProtect ONE PIC Setting up the play back function using the LCD monitorSlide Repeat ResizePrint Menu tab Main menu Sub menu Secondary menuIndex Dpof Print Photo OFF ResetStarting the slide show Press the OK button to save the configurationOn selected 1536 1200 768 480 ResizeImage Resize Types 2048X 1600X 1024X 640X LogoUnlock Protecting imagesALL Pics UnprotectedDeleting all images Selecting no Cancels Delete AllButton and press the OK button Voice recordings Press the LEFT/ Right button and select the Dpof menu tabWindow for selecting number of copies Current picture onlySelect the Size menu by pressing the UP/ Down Setting the Print SizeIf Index is selected LEFT/ Right button Cancels Copy to Card YESScreen will return to play mode Copying to the Memory CardPictBridge Printer SetupImages Submenu value, and then press the OK button PictBridge Picture SelectionImages menu will appear Use the UP and Down buttons to select the desiredStandard PictBridge PrintingYES AUTO, OFF, on PictBridge Print SettingAuto SET AUTO, DRAFT, NORMAL, FinePictBridge Reset Setup menu Bright Setup menuFile name USB Computer PrinterDown button and press the Right button Auto power offFile name Select the PWR Save menu by pressing the UPLanguage Press the LEFT/ Right button and select the SetupNo IMAGE! message will appear Formatting a memory cardDate type Setting up the Date/ TimeOnly the Date will be imprinted on the image file Imprinting the recording dateSound There is an option to include DATE/TIME on still imagesPrinter Selecting an External Device USBLCD brightness Select this if you want to connect the camera to your PCInitialising the Camera InitialisationRESET ALLSelect the Reset menu by pressing the UP/ Down Quick viewUser Image Setting up the Mycam menuItems indicated by are default settings Menu tab Main menu Start up imageStart up sound Shutter soundImportant notes Important notes Card Full Card ErrorFile Error LOW BatteryBefore contacting a service centre Clean the lens Symptom Causes RemedyShot mode Mode UnclearConnection When usingCheck the connection Camera is off Turn the camera onSpecifications Superfine 27 Fine 34 Normal Power SourceSpecial Features 10cm Macro, Various Scene Modes File FormatSystem Requirements Software NotesAbout the software Setting up the application software About the application program Frame 8 may not appear according to System requirements Select Components window will appear. Click Next button Setting up the application software Information Starting PC mode Cut Starting PC Mode Removing the USB Driver for Windows 98SE Lamp stops blinking Removable DiskIcon on the task bar Removing the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACProperty Digimax ViewerEtc Using PhotoImpression FAQ Win XP Manager → Universal Serial Bus controllersWin → Device Manager → Universal Serial Bus controllers105 Type regsvr32 /u m3jpgdec.ax and press the Enter key Memo 6806-2432