Ricoh A12 instruction manual Shutter Speed Priority Mode, Manual Exposure Mode

Page 25

S: Shutter Speed Priority Mode

If [Auto] or [Auto-Hi] is selected for the ISO setting, the exposure will be adjusted to the proper exposure within the ISO range while the camera is in shutter speed priority mode.

M: Manual Exposure Mode

If [Auto] or [Auto-Hi] is selected for ISO Setting, ISO will be fixed at 200 while the camera is in manual exposure mode.

You can select between B (Bulb) and T (Time) for the shutter speed. With B, the image is exposed while the shutter release button is pressed and exposure ends when the button is released. With T, exposure starts when the shutter release button is pressed and ends when it is pressed again. In either mode, the camera stops shooting compulsorily once 180 sec. has elapsed.

Note---------------------------------------------------------------------------------------

B and T can both be operated using the optional cable switch (CA-1).

25

Image 25
Contents GXR Mount A12 Package Contents This manual GXR Camera Body User Guide IntroductionPage Page  Danger Safety PrecautionsSample Warnings  Warning  Caution Table of Contents Settings Key Custom Settings Tab Menu Specifications Names of Parts Updating the firmware Upgrading the ProductTurn on the camera body Lens does not have to be attached when updating the firmware Attaching the Lens There are gaps between the lens checker and the lens mount Page Removing the Lens Attaching the LensDo not touch the sensor or shutter Cleaning the sensor unitShooting Program Shift Mode/A Aperture Priority ModeFocus Manual Exposure Mode Shutter Speed Priority ModeAddition of Scene Modes Enlarging pictures Addition of Supported Sizes for Auto Resize Zoom Registering Functions to the Up-down DialPicture Quality/Size SettingsPhotographs Movies Noise Reduction White Balance ISO Setting Peripheral illum Focus AssistColor shading correction Distortion CorrectionFlash Shut Spd Lim Reg. My Settings Key Custom Settings Tab MenuEdit My Settings Shutter Button Confirmation ADJ. Lever SettingsADJ. Direct ISO Control Delete My SettingsSet Fn1/Fn2 Buttons Zoom Button Restore DefaultsISO Auto-High Settings Setup MenuDigital Zoom Image Setting Changing Operation Sounds Target Zoom PlayFocus assist selection Zoom Display ReleaseSpecifications Standard Output Sensitivity RAW File size VGA Photographs Internal Memory/Memory Card Capacity5M/FINE Movies Appendices Optional AccessoriesPrecautions for Use Tip Avoiding Condensation Caring for the Equipment Equipment Care and StorageStorage Warranty and Servicing Page Page Page Page If You Encounter a Problem with This Product L454