Precautions for Use
•The warranty supplied with this product is only valid within the country of purchase.
•Should the product fail or malfunction while out of the country, the manufacturer assumes no responsibility for servicing the product locally or bearing any expenditure incurred thereby.
•Do not drop the equipment or subject it to physical shocks.
•When carrying the equipment, be careful that it does not strike other objects. Particular care is required to protect the lens.
•Abrupt changes in temperature may cause condensation, resulting in visible condensation inside the lens or malfunction of the equipment. This can be avoided by placing the equipment in a plastic bag to slow the temperature change, and removing it only after the air in the bag has reached the same temperature its surroundings.
•Keep the equipment dry and avoid handling it with wet hands. Failure to observe these precautions could result in malfunction of the equipment or electric shock.
•Keep the connector clean.
Tip: Avoiding Condensation---------------------------------------------------------
Condensation is particularly likely to occur if you move to an area with a sharply diffferent temperature, if humidity is high, in a cold room after the heater has come on, or where the camera is exposed to cold air from an air
40conditioner or other device.