When powering the camera ON for the first time the camera will take you through the INITIAL
CAMERA SETUP.
Powering the Camera ON
1)Make sure the batteries have been inserted properly into your digital camera. Use 2x AA (1.5v) batteries (not included). Alkaline batteries recommended.
2)Make sure an SD card has been properly inserted into your camera (until a click sound is heard).
NOTE: After the camera is powered on, an SD icon will appear on the LCD display.
If you do not see the SD icon on the display, please check if the card was inserted properly.
3)Press the POWER 
button to turn on the camera.
Setting the Camera Language
1)You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice and press the SET button to confirm the selection.
2)After selecting a language, you will be asked if you would like to continue with the initial camera setup. A message will appear: “Continue with Camera Setup?” Select “Yes” to continue or “No” to exit the setup.
NOTE: If you select “No” and decide to leave the camera setup, the camera will be set to its default settings. These settings can be adjusted at any time manually through the menus in the camera.
5