When powering the digital video recorder ON for the first time the digital video recorder will take you through the initial setup.
Powering the Digital video recorder ON
1.Make sure the batteries have been inserted properly into your digital video recorder. Use 4 x AAA (1.5v) batteries. Rechargeable batteries are not recommended for use.
2.Make sure an SD card has been properly inserted into your digital video recorder (inserted until a click sound is heard).
Note: After the digital video recorder is powered on, an SD icon will appear on the LCD display. If you do not see the SD icon on the display, please check if the card was inserted properly.
3.Flip open the LCD screen and press the POWER button 
, located on the inside wall, to turn on the digital video recorder.
Setting the Language
1.You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice and press the SET button to confirm the selection.
2.After selecting a language, you will be asked if you would like to continue with the initial camera setup. A message will appear: “Setup Camera?” Select “Yes” to continue or “Cancel” to exit the setup.
Note: If you select “Cancel” and decide to leave the camera setup, the camera will be set to its default settings. These settings can be adjusted at any time manually using the menus in the camera.
5