Samsung AD68-01762A, D-XENON 100 Macro Using the Quick-Shift Focus System GX -series cameras only

Page 14

Using the Quick-Shift Focus System (GX -series cameras only)

If you use the lens with an GX -series camera and the focus mode is set to autofocus, you can focus manually after autofocus is achieved. Just turn the focusing ring to manually touch-up the focus. You can do this without changing the focus mode to MF.

How to use the Quick-Shift Focus System 1. Using Autofocus

Set the camera’s focus mode switch to autofocus, then press the shutter button halfway to autofocus.

With the GX camera set as explained by “Focusing with the OK Button” on page 9, you can focus by pressing the OK button.

2. Hold down the shutter button halfway (or hold down the OK button) and then turn the focusing ring to focus.

You can focus the subjec with the OK button (GX-1S / 1L) and the AF button (GX-10).

3.Finally, press the shutter release button fully to take a picture.

12

Image 14
Contents Page Foreword For Safe USE of Your Lens Precautions and Lens Maintenance Storage and mildew preventionContents Schneider D-XENON Lens AF mount AF2 mount About the lens mountLens Mount Compatibility Memo Mounting and Removing the LensTo mount the lens on the camera body To remove the lensLens CAP Using Autofocus FocusingChanging the Focus Mode Focusing with the OK Button Focusing with the AF ButtonUsing Manual Focus Using the Quick-Shift Focus System GX -series cameras only How to use the Quick-Shift Focus System 1. Using Autofocus《13》 Aperture Control Clamp Switch Macro LensAbout the Clamp Switch Attaching the Lens Hood Precaution on filters FiltersPrecautions When Using the Lens with a Flash Built-in FlashMain Specifications For customers in USA For customers in CanadaMemo 《23》 《24》 AD68-01762A