NOTES ON LENS INSTALLATION
•Lens installation and replacement should be made by the qualified service per- sonnel.
•Be sure to install the lens following this procedure precisely.
•The lens cover is attached to the lens for protection. Be sure to remove the lens cover from the lens before installation.
•When installing or replacing the lens, be careful not to stain, scratch or damage its surface.
LIST OF CONTENTS
Following parts are included in the package.
• | LENS | 1 pc |
• | DRIVER | 1 pc |
BE SURE TO CHECK THE FOLLOWING MATTERS FOR SAFETY
After installing or replacing the lens, be sure to confirm the followings for safety.
1.Make sure the lens is fixed on the projector.
2.Make sure no part is missing, or loose.
Not all the parts included may be used for lens installation or replacement. Keep these parts for later use.
Note : Illustrations in this manual may differ from the actual product.