Sanyo Camera Lens instruction manual Installation, Call Factory for Other Configurations

OUTDOOR COLOR MODELS

Model	Description	Camera	Lens	Housing	Mount
	330TVL Color Camera (VCC-3954), 2.8-12mm AI Vari-focal Lens,		SVCL-	VSE-
VSE-P2351HBSA	3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,	VCC-3954			MTS-2000
			CS2812VA	2300HBS
	Blower, Sunshield, Pre-cabled, 24VAC, outdoor
	330TVL Color Camera (VCC-3954), 5.0-50mm AI Vari-focal Lens,		SVCL-	VSE-
VSE-P2352HBSA	3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,	VCC-3954			MTS-2000
			CS550VA	2300HBS
	Blower, Sunshield, Pre-cabled, 24VAC, outdoor
	520TVL Color Camera (VCC-6584), 2.8-12mm AI Vari-focal Lens,	VCC-6584	SVCL-	VSE-	MTS-2000
VSE-P2361HBSA	3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,
			CS2812VA	2300HBS
	Blower, Sunshield, Pre-cabled, 24VAC, outdoor
	520TVL Color Camera (VCC-6584), 5.0-50mm AI Vari-focal Lens,		SVCL-	VSE-
VSE-P2362HBSA	3 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,	VCC-6584			MTS-2000
			CS550VA	2300HBS
	Blower, Sunshield, Pre-cabled, 24VAC, outdoor
OUTDOOR DAY/NIGHT MODELS
Model	Description	Camera	Lens	Housing	Mount
	520TVL Day/Night Camera (VCC-4594), 2.8-12mm AI Vari-focal Lens,		SVCL-	VSE-
VSE-P2461HBSA	4 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,	VCC-4594			MTS-2000
			CS2812VA	2400HBS
	Blower, Sunshield, Pre-cabled, 24VAC, outdoor
	520TVL Day/Night Camera (VCC-4594), 5.0-50mm AI Vari-focal Lens,		SVCL-	VSE-
VSE-P2462HBSA	4 1/2" x 16" Cylindrical Housing, Feed-thru Wall Mount, Heater,	VCC-4594			MTS-2000
			CS550VA	2400HBS
	Blower, Sunshield, Pre-cabled, 24VAC, outdoor

CALL FACTORY FOR OTHER CONFIGURATIONS.

5 INSTALLATION

Attention: This installation should be made by qualified service personnel and conform to the National Electrical Code and applicable local codes.

5.1Operating Voltage

Recommended operating voltage is 24 V AC, 60 Hz.

5.2Preparing the Unit

Remove the mount and housing assembly from the carton.

5.3Mount

Prepare and secure the mount to the wall or mounting surface as described in the Mounts Instruction Manual included in the installation document packet.

5.4Housing

Feed the cabling from the housing foot through the mount. Additional cables such as those used for RS-232 connections can be fed through the back fittings. Attach the housing to the mount using the screws and washers provided in the hardware kit. For additional information, refer to the

Wall Mount Instruction Manual and

Housing Instruction Manual.

5.5Line Power and Video Signal Connection The external video coax cable is equipped with a BNC connector to accept video signal. Route and connect video cable to the BNC connector. The external power cable will be provided to allow for necessary stripping/preparation by the installer. For additional information, refer to the Installation manuals included in the Installation document packet.

5.6Camera/Lens Adjustment

The camera and lens come factory configured and ready for operation. If custom setup is required, refer to the camera Installation Instructions included in the Instruction Booklet Packet.

5.7Sunshield

Sunshields are provided with the outdoor packages. Refer to the Sunshield Installation Manual for information.

6