Vivitar viviCam 3350 user manual Capturing Images, Power On the Camera

Hi 026

4.0 Capturing Images -

Using your new Vivicam 3350 is fun and easy. There are two basic steps to capturing your first image.

Step 1: Turn on the camera by pressing the Power Button.

Step 2: Press the shutter button to capture an image.

It is really that easy! The following sections will tell you about more features that are available on your camera.

4.1 Power On the Camera -

To power on the camera press the Power/Menu button as shown above. The camera will beep once, indicating that it is ready.

The Information/Status display will turn on like this:

In this example the camera is ready to capture 26

images in Hi resolution mode. (Display icons are explained in section 4.3.)

Note that the camera will automatically power-off after 20 seconds to save battery power. To turn the camera on again, press the Power button.