Vivitar ViviCam 2750 user manual Video Interface, Appendix 1 LCD Icons

Page 15

d. Downloaded images will be stored to your computer’s hard drive, where you can later print them out, edit them in imaging software, and even email them.

e. The camera’s digital output connector will automatically transmit data at varying baud rates, depending upon the capabilities of your computer. If the camera, while attached to your computer, remains inactive for a given length of time, it shuts down automatically.

Note: When downloading your images, make note of where they are being saved. Record the “path” to the directory or folder where your images are being saved. This is an essential key to finding your images again.

Connecting a digital camera to a PC is perhaps the most challenging (sometimes- frustrating) aspects of consumer digital imaging today. If your camera and PC will not connect then your serial ports must be examined. You can inspect your computers ports using the device Manager Tab of the Windows (Start, Settings, Control Panel, System, Device Manager.) For assistance in enabling or setting your ports, consult your PC system manual or manufacturer. In some cases, changes may need to be made to your System BIOS. Please consult a knowledgeable PC expert before attempting any such changes or modifications.

Video Interface –

The ViviCam 2750 is capable of two types of output. In addition to the PC connection described above, you may also connect to a TV/monitor with NTSC. On the left side of the camera you will find three ports: NTSC video output, serial digital data output, and DC IN (6 VDC input).

The video output connector allows you play stored images (640x480), or live video to a standard television monitor. Note, however, when the LCD monitor is off, the camera will not output video via this port. To transmit stored images to your television or VCR attach the yellow-moulded end of the video cable to the video port of the digital camera, attach the other end to the “Video In” port on your television or VCR, and power on the camera and turn the on the LCD. Refer to your TV or VCR manuals for specific details on making a video connection to your video-ready device.

Appendix 1: LCD Icons

The following is a summary definition of the information icons that may appear on the LCD image display.

Fill Flash (Always on)

No Flash

Auto Flash

Self-Timer on

Full battery power

Half battery power

Low battery power

Locked file (cannot be erased)

Fine/High Quality mode

Image 15
Contents ViviCam Contents Whats Inside Getting StartedOptional Items CD-ROM or Diskette ContentsPage Getting to know the camera PC System RequirementsInstalling Batteries Using the cameraBattery Life Indicator Power SupplyUsing the Optional AC Power Adapter Flash MemoryExtended Flash Memory Taking Pictures Images Power Management Auto Power OffTo review your stored images, follow these three steps Using the LCD DisplayAdjusting LCD Brightness Viewing Your Images on the LCD Three stepsMenu Mode Defining Image Quality Erasing Images from MemoryMemory Full Using the Built-in FlashUsing the Self-Timer Connecting to Your Computer/Installing Capture SoftwarePage Appendix 1 LCD Icons Video InterfacePage Appendix 3 ViviCam 2750 Specifications Appendix 2 Record Mode IconsFCC Notice Warranty PolicyPage Page ViviCam 2750 Helpful hints Digital Products Limited One Year Warranty Quick Start Guide