Vivitar VIV-CV-1025V instruction manual Starting Your Camera, Taking Photos

Page 8

Starting Your Camera

Press and hold down the mode button (for about 2 seconds) to start the camera.

The camera will sound a beep to confirm that it is ready for use.

The LCD display will indicate the number of photos that can be taken before it becomes necessary to download them to your PC.

Taking Photos

1.Compose your shot using the viewfinder. Be sure to keep the camera very still to avoid blurriness.

2.Hold the camera steady and press the shutter button to take a photo.

3.The camera will beep when a photo is taken.

If the camera fails to beep or if a "0" appears on the LCD this is an indication that the memory is full in which event no further photos can be taken until the existing photos have been downloaded or cleared from the camera’s memory.

Note: The LCD display indicates how many photos may still be taken at the current resolution and compression. E.g. In "Lr" resolution and "CP" compression 160 images may be taken. However the LCD counter only displays up to 99. It will continue to display 99 until less than 99 images may still be taken.

-7-

Image 8
Contents 10x25 Digital Camera Binoculars Limited One Year Warranty Time Period of this WarrantyWhat to do When Service is Needed Table of Contents Minimum System Requirements Windows 2000, XP Windows Vista 32bit onlyQuick Look at Your Camera Preparing Your Camera For Use Starting Your Camera Taking PhotosCamera’s Modes Auto-Shoot Mode Continuous Shoot ModeOperating Your Camera Turning your Camera ODeleting All Photos Deleting the Last Photo TakenPhoto Resolution Photo Compression RatioFluorescent Lamp Light Frequency Photo StorageDisplay Video Recording Mode Software and Camera Driver Installation Software and Camera Driver Installation Software and Camera Driver Installation Software and Camera Driver Installation Downloading Photos Click on the Get Photos button on the Main Menu Downloading Photos Specifications Internal Memory 16Mbit Sdram