When powering the camera ON for the first time the camera will take you through the INITIAL CAMERA SETUP:
Powering the Camera ON
1)Make sure the batteries have been inserted properly into your digital camera.
If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use.
2)Make sure an SD card has been inserted into your camera.
3)Press the POWER button 
to turn on the camera. The camera will be in Photo Capture mode to start. Powering the camera OFF
While the camera is on, you can press the Power button 
again at any point to turn your
camera OFF. You will see a “Goodbye” splash screen and then the camera will power off completely.
Note: Your digital camera also has an Auto Power Off feature that will automatically turn off your camera after a specific period of time that your camera is left idle. The Auto Power Off settings can be set from the Auto Power Off settings menu.
Setting the Camera Language
1)You will first be prompted to select a language for the camera. The Language selection menu will appear. Select the language of your choice and press the SET button to confirm the selection.
2)After selecting a language, you will be asked if you would like to continue with the initial camera setup. A message will appear: “Continue with Camera Setup?”
3)Select “Yes” to continue or “No” to exit the setup.
Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default settings. These settings can be adjusted at any time manually through the menus in the camera.
5