Loading a SD memory card (optional accessory)
The camera comes with 8MB of internal memory, allowing you to store images and video clips in the camera. However, you can expand the memory capacity by using an optional SD memory card so that you can store additional images and video clips.
1.Make sure the camera is off.
2.Slide the battery/SD card cover in the direction of the OPEN arrow.
3.Insert the SD memory card.
The front side of the memory card (printed arrow) should face towards the front side of
Ethe camera.
If the card cannot be inserted, check the orientation.
4. Close the battery/SD card cover.
To remove the SD memory card, make sure the camera is off. Open the battery/SD card cover. Press lightly on the edge of the memory card and it will
eject.
NOTE
•To prevent valuable data from being accidentally erased from an SD card you can slide the write protect tab (on the side of the SD memory card) to “LOCK”.
•To save, edit, or erase data on an SD memory card, you must unlock the card.
LOCK | LOCK |
Write protection | Write protection |
tab | state |
Attaching the strap
To prevent accidental dropping of the camera, always
use the strap.
1.First thread the small loop of the wrist strap through the strap eyelet on the camera and then pull the large loop through the small loop until the strap is firmly secured.
14