1.Slide the Macro/Far switch on the side of the camera to the position .
2.The icon will appear on the LCD screen to indicate that the far shooting function is on.
Flash
In low light conditions it is best to use the
Force Flash, Auto, Red eye reduction, No Flash
To set the flash:
Note: Please move the Macro/Far setting to Far mode. The flash can only be use when the camera is in Far mode. If you are in the Macro close up mode and try to use the flash, a message will appear on the LCD to remind you that you are in “Macro Mode”. Select the Macro setting option to change to the Far mode in order to use the flash.
1.Press the Flash/Up button.
2.The icon appears on the LCD screen. This will activate the automatic flash.
3. The | icon as well as the red LED will begin to flash indicating that the flash is charging. |
4.Press the Flash button again for the icon to appear on the LCD screen. This means the flash function has been "forced on" (manual flash).
11