Note: The working distance of an infrared signal can vary dramatically. Bright light, obstructions between the remote and the device, weak batteries and other factors may impact the reliability of remote operation.
Charging the battery
Your LED336 light includes a battery and charger. To charge the battery:
1.Align the contacts of the battery with the battery charging contacts on the charger. Gently slide the battery onto the charger until you hear a slight click. The battery will be locked into place.
2.To remove the battery, press down on the lock tab at the end of the battery and slide the battery away from the charger.
3.Plug the charger into an A/C power source. The charge indicator will glow red.
4.When the battery is fully charged, the battery indicator will glow green (approximately 4 hours).
WARNING: Only use the battery type specified for this charger. Using an incompatible battery may cause fire, explosion, or personal injury.
Safety Tips
To prevent any damage to your product or personal injury, please read the following safety precautions before operation.
1.To prevent the risk of fire or electric shock, do not expose this device to rain or moisture.
2.Use of incorrect battery or power supply may cause this unit to be damaged or become inoperable. Please note the correct operating voltage before use.
3.If this unit emits smoke or a strange odor, disconnect the power immediately to prevent further damage to the equipment or personal injury.
4.Do not disassemble this product. If the equipment is dropped or damaged by other means, please disconnect the power and return it to your dealer for service.
5.Remove the battery and power supply for storage and transportation. Leaving the battery or power supply attached for long periods of time without use may cause fire or other unsafe conditions.
6.Keep out of reach of children. This is not a toy and may cause injury if handled improperly.
7.Be sure to observe all instructions for proper use of the battery and charger. Improper operation may cause the battery to leak or burst.
8.Do not disassemble or short circuit the battery. Do not expose the battery to flame or excessive heat. Do not immerse the battery in water or other fluids. All of these actions can cause fire, explosion, or personal injury.
9.This light is very bright. Avoid staring at the light when it is on. Lengthy exposure to the eyes could cause vision impairment.
10.Do not cover the ventilation grille, which could cause excessive heat build up inside the light and cause damage.
11.Do not expose the light to water or other liquids, which could cause a short circuit and damage the light.
12.Avoid placing the light near alcohol, gasoline, or other flammable or volatile solvents which could cause fire or damage to the light.
13.Do not pick up your camera by the light when it is attached. This could cause damage to the light and/or your camera.