Operator Manual PE Series Amplifiers | Ashly PE-Series specification

Page - 2	Operator Manual – PE Series Amplifiers

Important Safety

Instructions - 2

Introduction - 3

The PE Series - 4

Physical Description - 5

Installation - 6

Operation - 8

Troubleshooting - 9

Spec Table - 10

Measurements - 11

Dimensions - 12

Warranty - 13

Important Safety Instructions

Consignes de sécurité à lire attentivement

This power amplifier can produce dangerous	Cet amplificateur de puissance peut produire un
output voltage, power and sound pressure	voltage et une pression acoustique qui pourrait être
levels. In order to minimize the risk of injury,	dangereuse ou pourrait meme causer des
damage, or hearing loss, please read the entire	problêmes ou perte accuité auditive. Consultez le
owner’s manual.	manuel d’instruction et observez les consignes.

The lightning flash with arrowhead symbol, within an equilateral triangle, is		Le symbole de la flèche dans un triangle équilateral symbolisant la foudre est
intended to alert the user to the presence of uninsulated "dangerous voltage"		prévu pour sensibiliser l’utilisateur à la présence de tension de voltage non isolée
within the product's enclosure that may be of sufficient magnitude to constitute a		à l’intérieur de l’appareil. Elle pourrait constituer un danger de risque de
risk of electric shock to persons. The exclamation point within an equilateral		décharge électrique pour les utilisateurs. Le point d’exclamation dans le triangle
triangle is intended to alert the user to the presence of important operating and		équilatérale alerte l’utilisateur de la présence de consignes qu’il doit d’abord
maintenance instructions in the literature accompanying the device.		consulter avant d’utiliser l’appareil.

This manual uses a Perpetual Table Of Contents. Each page has a copy of the manual’s contents in a gray box just like this one. The section you are in will always be bold with the other sections “grayed out.” The feature allows you to jump directly to another section without having to return to a Table Of Contents page.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

6.Do not use this apparatus near water.

7.Clean only with dry cloth.

8.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

9.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

10.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

11.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

12.Only use attachments/accessories specified by the manufacturer.

13.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

14.Unplug this apparatus during lightning storms or when unused for long periods of time.

15.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

1.Lisez ces instructions.

2.Conservez ces instructions.

3.Observez les avertissements.

4.Suivez ces instructions.

5.Pour réduire le risque de feu ou la décharge électrique, ne pas exposer cet appareil pour pleuvoir ou l'humidité.

6.Ne pas utiliser l’appareil près de l’eau.

7.Le nettoyer à l’aide d’un tissus sec.

8.Ne pas bloquer les ouvertures de ventilation, installer selon les consignes du fabricant.

9.Eloigner des sources de chaleur tel: radiateurs, fourneaux ou autres appareils qui produisent de la chaleur.

10.Ne pas modifier ou amputer le système de la mise à terre. Une prise avec mise à terre comprend deux lames dont une plus large ainsi qu’une mise à terre: ne pas la couper ou la modifier. Si la prise murale n’accepte pas la fiche, consulter un électricien pour qu’il remplace la prise désuète.

11.Protéger le cordon de secteur contre tous bris ou pincement qui pourraient l’endommager, soit à la fiche murale ou à l’appareil.

12.N’employer que les accessoires recommandés par le fabricant.

13.N’utiliser qu’avec les systèmes de fixation,chariots, trépied ou autres, approuvés par le fabricant ou vendus avec l’appareil.

14.Débrancher l’appareil lors des orages électriques ou si inutilisé pendant une longue période de temps.

15.Un entretient effectué par un centre de service accrédité est exigé si l’appareil a été endommagé de quelque façon: si il a été exposé à la pluie,, l’humidité ou s’il ne fonctionne pas normalement ou qu’il a été échappé.

PE-Series specifications

The Ashly PE-Series is a premium range of signal processing devices designed for professional audio applications. Known for its robust construction and advanced technology, the PE-Series stands out in various environments—from live sound settings to fixed installations. These devices are widely recognized for their high-quality performance, versatility, and ease of use.

One of the main features of the Ashly PE-Series is its exceptional audio quality. The series utilizes high-performance analog and digital components to ensure clear, precise sound reproduction. This quality is further enhanced by low-noise operation and high-headroom designs that minimize distortion, even at high output levels. As a result, users can expect transparent sound with complete fidelity.

The PE-Series includes various models, each tailored for specific applications. These models often have multiple channels, allowing for complex audio routing and processing. One of the key technologies incorporated into the PE-Series is the integrated DSP, which provides advanced processing capabilities. This feature enables a range of functions such as equalization, dynamic processing, and crossover functionality, allowing users to customize their audio experience to meet specific requirements.

Another noteworthy characteristic of the PE-Series is its intuitive user interface. The devices come equipped with an easy-to-read LCD display and user-friendly controls, streamlining the setup and adjustment processes. This design ensures that both seasoned audio engineers and novices can operate the devices effectively, reducing the learning curve often associated with professional audio equipment.

Durability is a cornerstone of the Ashly PE-Series. The rugged metal chassis protects the internal components from physical damage, making these devices suitable for both mobile and permanent installations. Additionally, the units are designed to manage heat efficiently, which contributes to their reliability during extended use.

Connectivity options are plentiful, with various input and output configurations available across the PE-Series models. This flexibility allows seamless integration into existing audio systems, whether analog or digital, ensuring that users have the necessary tools for optimal performance.

In summary, the Ashly PE-Series is an impressive line of audio signal processors, distinguished by its audio quality, advanced DSP technology, user-friendly interface, and robust durability. These characteristics make it an ideal choice for professionals seeking to enhance the sound quality in live and installed settings. Whether you’re looking to refine your audio system or expand your sound processing capabilities, the Ashly PE-Series is certainly worth considering.

Operator Manual – PE Series Amplifiers

manuel d’instruction et observez les consignes.

PE-Series specifications