4.You can now use the IP camera’s FTP server account.
5.On the Ftp Service Settings window, fill in your FTP Server setting information. Click on Submit when done.
6.Click on theTest button to confirm setup and testing is successful. When your IP camera alarms, images will be uploaded to your FTP server, according to the settings of the main directory path (see below)
FTP Server:The FTP server IP address.
FTP Port:The port is usually 21.
FTP Mode:This will support both standard (PORT) and passive(PASV) modes.
Upload Image Now: Select this box and images will be uploaded.
Upload Interval: Lets you set the time interval (in seconds) you wish between image uploads.
7.6 Motion Detection
Go to the Alarm Service Settings page to configure the Motion Detection (alarm) function.
Motion Detect Armed – When you enable Motion Detection Armed, the camera will sound an alarm when motion is detected and it will record the incident. Should motion be detected, the Alarm Status will automatically switch to Alarm Detect Alarm and perform the following:
- Send an email containing the alarm information.
48 | IP100 Manual | 49 |
| ||
|
|
|