Polaroid PDC 5070 manual Setting the Flash Mode

• Setting the Flash Mode

The Flash Range is approximately 3.2 feet to 6.5 feet (1 to 2 meters).

1.Turn on the camera.

2.Set the camera to Still Image mode.

3. Press Flash button to cycle through the flash mode until the one you want is shown on the LCD screen.

POLAROID

DI G I T A L C A M E R A

Flash mode off, the flash does not fire. Use this setting for outdoor pictures or where flash is prohibited or may be distracting. Also use when shooting toward a reflective surface, such as a window or mirror. If you do not have enough light when using this setting, your pictures will be too dark.

Auto Flash mode, the flash fires automatically as needed. Use this setting to take most of the pictures.

Red-eye Reduction Mode. Use this setting to avoid red glare in your subject’s eyes. The camera fires a brief, preflash flash before the regular flash.

Flash mode on, the flash fires for every picture. Use this setting indoors in low light.

Please note that when flash mode is selected, the Status LED blinks until the flash finishes charging, then the Status LED will be on until pressing the shutter button to take a picture.

NOTE:

• Flash modes are not available in Video mode.

•Never touch or block the flash with your fingers. Doing so can soil these components and interfere with the correct flash operation.

28 Polaroid PDC 5070 Digital Camera User Guide

www.polaroid-digital.com